Click my website linkmotoxxx wrote:yea but i cant read japanese websites to order stuff from there.
unless you know of any good ones....
lightweight sprockets for H1?
Moderator: Moderators
- Mori Man
- Blingmeister

- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: lightweight sprockets for H1?
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
- motoxxx
- Posts: 25
- Joined: Fri Mar 13, 2009 11:05 pm
- My Bike: ZXR400 H1 Race bike
Re: lightweight sprockets for H1?
well after ordering them from intobikes.co.uk my rear sprocket doesnt fit 
the packaging says its for a 89 and the code is correct. hmmmm not sure about this one
the packaging says its for a 89 and the code is correct. hmmmm not sure about this one
-
zxr500man
- L-plate hell

- Posts: 254
- Joined: Mon Feb 08, 2010 6:47 pm
- My Bike: tomos moped
Re: lightweight sprockets for H1?
i hate when that happens 
- Mori Man
- Blingmeister

- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: lightweight sprockets for H1?
If your still needing one tell me what Teeth you want and I will get you one - I can also confirm it will fit as I have a hub out on veranda to fit it too................. no chance of it not fitting thenmotoxxx wrote:well after ordering them from intobikes.co.uk my rear sprocket doesnt fit
the packaging says its for a 89 and the code is correct. hmmmm not sure about this one
Sunstar sprockets at amongst the lightest you can get - have many customers using them on their 11/1200's with out issue. One fella has a turbo 1200 and he got his about 4 years ago now, in that time I have never had him complain about it.
MM!
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
- motoxxx
- Posts: 25
- Joined: Fri Mar 13, 2009 11:05 pm
- My Bike: ZXR400 H1 Race bike
Re: lightweight sprockets for H1?
Hey mori, can i get you to do me a favour. i just had an email back from the guy at intobikes and he contacted renthal and they say that i have either an h2 carrier or an l1 carrier. Very strange as i bought the bike as an original road bike and converted it to race. could you do me a favour and measure your h1 carrier and see if its the same as my pictures.
thanks
thanks
You do not have the required permissions to view the files attached to this post.
- Mori Man
- Blingmeister

- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: lightweight sprockets for H1?
Not sure if its a H1 or H2 hub as I picked it up as a spare.
I will compare these measurements with the hub on my bike which I know to be H2
so here are the dimensions:
Stud to Stud centre: 52 mm
Centre hole: 80mm
Stud: 10mm
Stud mounting Diameter: 104mm
The Afam sprocket is same measurements as your diagrame.
I will compare these measurements with the hub on my bike which I know to be H2
so here are the dimensions:
Stud to Stud centre: 52 mm
Centre hole: 80mm
Stud: 10mm
Stud mounting Diameter: 104mm
The Afam sprocket is same measurements as your diagrame.
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
- Mori Man
- Blingmeister

- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: lightweight sprockets for H1?
So, yip its a H2 hub that I have.
I was along at the shop today and looked at the RH-103 Sunstar sprocket thats listed for the H1
Its centre hole is: 105mm
Stud to Stud looked like 70~75mm
So no way a H1 / ZX4 Rear sprocket is going onto a H2 / L hub.
Your pictures are definetley H2 / L fitment.
MM!
I was along at the shop today and looked at the RH-103 Sunstar sprocket thats listed for the H1
Its centre hole is: 105mm
Stud to Stud looked like 70~75mm
So no way a H1 / ZX4 Rear sprocket is going onto a H2 / L hub.
Your pictures are definetley H2 / L fitment.
MM!
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
- motoxxx
- Posts: 25
- Joined: Fri Mar 13, 2009 11:05 pm
- My Bike: ZXR400 H1 Race bike
Re: lightweight sprockets for H1?
wow thats wierd as i bought the bike as a road going bike, de registered it and raced it. i have two sets of wheels, the other set was from an h1 also. very strange but thanks heaps for your help!