lightweight sprockets for H1?

There seems to be more and more members appearing that are racing the ZXR400 so i've created a special section just for you to show off results, discuss meets etc etc.

Moderator: Moderators

User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1976
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: lightweight sprockets for H1?

Post by Mori Man »

motoxxx wrote:yea but i cant read japanese websites to order stuff from there.
unless you know of any good ones....
Click my website link :smt003
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
User avatar
motoxxx
Posts: 25
Joined: Fri Mar 13, 2009 11:05 pm
My Bike: ZXR400 H1 Race bike

Re: lightweight sprockets for H1?

Post by motoxxx »

well after ordering them from intobikes.co.uk my rear sprocket doesnt fit :smt009

the packaging says its for a 89 and the code is correct. hmmmm not sure about this one
zxr500man
L-plate hell
L-plate hell
Posts: 254
Joined: Mon Feb 08, 2010 6:47 pm
My Bike: tomos moped

Re: lightweight sprockets for H1?

Post by zxr500man »

i hate when that happens :smt012
User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1976
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: lightweight sprockets for H1?

Post by Mori Man »

motoxxx wrote:well after ordering them from intobikes.co.uk my rear sprocket doesnt fit :smt009

the packaging says its for a 89 and the code is correct. hmmmm not sure about this one
If your still needing one tell me what Teeth you want and I will get you one - I can also confirm it will fit as I have a hub out on veranda to fit it too................. no chance of it not fitting then :smt001

Sunstar sprockets at amongst the lightest you can get - have many customers using them on their 11/1200's with out issue. One fella has a turbo 1200 and he got his about 4 years ago now, in that time I have never had him complain about it.

MM!
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
User avatar
motoxxx
Posts: 25
Joined: Fri Mar 13, 2009 11:05 pm
My Bike: ZXR400 H1 Race bike

Re: lightweight sprockets for H1?

Post by motoxxx »

Hey mori, can i get you to do me a favour. i just had an email back from the guy at intobikes and he contacted renthal and they say that i have either an h2 carrier or an l1 carrier. Very strange as i bought the bike as an original road bike and converted it to race. could you do me a favour and measure your h1 carrier and see if its the same as my pictures.
thanks
You do not have the required permissions to view the files attached to this post.
User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1976
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: lightweight sprockets for H1?

Post by Mori Man »

Not sure if its a H1 or H2 hub as I picked it up as a spare.

I will compare these measurements with the hub on my bike which I know to be H2

so here are the dimensions:

Stud to Stud centre: 52 mm

Centre hole: 80mm

Stud: 10mm

Stud mounting Diameter: 104mm

The Afam sprocket is same measurements as your diagrame.
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1976
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: lightweight sprockets for H1?

Post by Mori Man »

So, yip its a H2 hub that I have.

I was along at the shop today and looked at the RH-103 Sunstar sprocket thats listed for the H1

Its centre hole is: 105mm
Stud to Stud looked like 70~75mm

So no way a H1 / ZX4 Rear sprocket is going onto a H2 / L hub.

Your pictures are definetley H2 / L fitment.

MM!
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
User avatar
motoxxx
Posts: 25
Joined: Fri Mar 13, 2009 11:05 pm
My Bike: ZXR400 H1 Race bike

Re: lightweight sprockets for H1?

Post by motoxxx »

wow thats wierd as i bought the bike as a road going bike, de registered it and raced it. i have two sets of wheels, the other set was from an h1 also. very strange but thanks heaps for your help!
Post Reply