www.zxrworld.co.uk

ok off the road for another month ish (hopefully ) so started stripping the zxr.

I need :
the bolts that hold the side stand switch sensor on ( or how do i just take it off ??)
proper bolts for the tank (or are they just bolts with washers??)
Front calipers !!! (mine are fubard pistons are all gankey and oen has a scratch on) so where is the thread saying about what other ones fir straight on ( black bird???)


FInal issue is my fan isnt switchign on no matter how hot she gets ( had it boil over stood outside a mates idling for 5-10 mins) so things to check ?? thermostat ?? the cables are going to the fan so im lost ><

woudl it be ok to just run a live to the fan and a switch under the tank or something?

WelshD1K wrote:ok off the road for another month ish (hopefully ) so started stripping the zxr.

I need :
the bolts that hold the side stand switch sensor on ( or how do i just take it off ??)

if you don't have the bolts does that mean its off already?

WelshD1K wrote:proper bolts for the tank (or are they just bolts with washers??)

aren't they just cap heads with top hat washers?

WelshD1K wrote:Front calipers !!! (mine are fubard pistons are all gankey and oen has a scratch on) so where is the thread saying about what other ones fir straight on ( black bird???)

viewtopic.php?f=55&t=2743
who you calling a black bird?

WelshD1K wrote:FInal issue is my fan isnt switchign on no matter how hot she gets ( had it boil over stood outside a mates idling for 5-10 mins) so things to check ?? thermostat ?? the cables are going to the fan so im lost ><

take the 2 wires off the fan switch on the back of the rad and bridge them together, the fan should come on, if it don't the fan is shagged. (watch your fingers)

WelshD1K wrote:woudl it be ok to just run a live to the fan and a switch under the tank or something?

most people do for reassurance

side stand switch is currently attatched just cable tied to the frame (the actual switch)

can you disconnect the whole thing??

kk ill order some washers

ty

and teh fan ill have a play later . just stiped all the tank etc off it

OK found aREALLY nice set of zzr calipers cheap. so will zzr600d calipers just bolt onto a h2 ??

To check the fan switch itself, stick it in a pan of water with a thermometer in. Heat the water and measure the resistance accross the the 2 prongs. It should go from very high/infinate to very low at around 80C.

any ideas on zzr600d2 calipers??