usefull
Posted: Thu Apr 26, 2007 12:26 pm
This looks good gonna get him to do some work on mine when it next needs doing http://www.superbikesurgery.co.uk
Page 1 of 1
Posted: Thu Apr 26, 2007 12:29 pm
thats wicked! nice workshop, i want one!
Posted: Thu Apr 26, 2007 12:53 pm
Hmm looks great!
I wonder how busy they are... and if they do plastic welding...
I wonder how busy they are... and if they do plastic welding...
Posted: Thu Apr 26, 2007 2:55 pm
be cheaper to get new fairings jamz than to reweld yours, they would need a new set to melt down to fill your gaps 
Posted: Thu Apr 26, 2007 3:02 pm
I'm considering nicking a wheelie bin and using that for the MOT! 
Posted: Thu Apr 26, 2007 3:18 pm
where you gonna fit the lights?Jamz wrote:I'm considering nicking a wheelie bin and using that for the MOT!
Posted: Thu Apr 26, 2007 3:38 pm
ahh shakey is that your ZXR there. it looks cool.
Posted: Thu Apr 26, 2007 3:44 pm
got bored of the pic of the bike at the old owners place, and found this of a couple of years ago when I was doing lots of mini moto my race bike cost more that what I paid for the zxr! parts were more expensive to! gave it up after breaking myself every week! 
Posted: Thu Apr 26, 2007 8:55 pm
never sodding easy is it! :smt013 got the caliper springs today fitted the one on the right (tapping) caliper then went to put the one on the left and there is the remains of a fixing bolt in the caliper so can't put the sodding thing on. how the hell am I going to get the basterd out? 
With this job on hold thought I would replace the screw on the brake resevoir as it was a bit rusty,well that all went wrong and eventually had to force it (and the nut) out so got to replace that now.
With this job on hold thought I would replace the screw on the brake resevoir as it was a bit rusty,well that all went wrong and eventually had to force it (and the nut) out so got to replace that now.