Page 1 of 2
More bike goodies on teh way!
Posted: Thu Jun 16, 2011 7:58 pm
by CaNsA
Only been used twice!
Mine, all mine
Re: More bike goodies on teh way!
Posted: Thu Jun 16, 2011 8:09 pm
by stevezx7r
Other than the ding in the can it looks spot on.
I did spot it on the bay but the wife said no as I'd just forked out for a bike, then a new motor and then some plastics.
Those headers alone are worth twice what you've paid for the lot.
A bargain.
Re: More bike goodies on teh way!
Posted: Thu Jun 16, 2011 8:38 pm
by CaNsA
They were part of a job lot that was listed about 7pm.
I spotted the pipes+zorst in a box and phoned the dude.
He listed them separately, called me back and i bought it straight away
Re: More bike goodies on teh way!
Posted: Thu Jun 16, 2011 10:35 pm
by masterofinsanity
bloody robber!!
Re: More bike goodies on teh way!
Posted: Fri Jun 17, 2011 2:16 pm
by Neosophist
argh I dont like the micron system! neither does Zimm iirc.
However.. the dynojet Kit is designed to be used with that setup so get yourself a cheap dynojet Kit and your away
Or if you want get a Nassert system
Re: More bike goodies on teh way!
Posted: Fri Jun 17, 2011 5:19 pm
by Mori Man
Turncoat wanted the RPM - what can you say ?
Bloody clover leaf
Re: More bike goodies on teh way!
Posted: Fri Jun 17, 2011 5:21 pm
by CaNsA
LOL, couldnt pass this up mate, 70 quid posted for a near perfect, used twice set of race pipes and can!
Re: More bike goodies on teh way!
Posted: Fri Jun 17, 2011 5:26 pm
by Mori Man
CaNsA wrote:set of race pipes and can!
Until you open the mid section and find the bafle plate
Just saying, thats all
Re: More bike goodies on teh way!
Posted: Fri Jun 17, 2011 5:42 pm
by CaNsA
wait what?
Addition - The bloke has posted it, should be here on monday
Re: More bike goodies on teh way!
Posted: Sun Jun 19, 2011 12:34 pm
by RedexRobB
thats right, the mid section has a baffle, they are removable with some effort i believe!
Angle grinder & gas/arc welder , your sorted
Re: More bike goodies on teh way!
Posted: Sun Jun 19, 2011 12:41 pm
by Mori Man
RedexRobB wrote:thats right, the mid section has a baffle, they are removable with some effort i believe!
Angle grinder & gas/arc welder , your sorted
Re: More bike goodies on teh way!
Posted: Sun Jun 19, 2011 5:27 pm
by Neosophist
Yep yep!
The 'dynojet kit' supposidly works well with this setup (and nothing else
) so see how you get on before you start chopping it to bits
Re: More bike goodies on teh way!
Posted: Mon Jun 20, 2011 5:34 pm
by Tirpitz
'Ang on a sec. I was thinking of getting a Dynojet kit for mine this coming winter. So are we saying the compatibility to the Micron system applies to ALL Dynojet kits, or just the stage-whateveritis which is for Race cans? The Stage 1 kit is for OEM exhausts, so I'm assuming this does work with the OEM (or similar) system, as I don't intend binning that any time soon?
Re: More bike goodies on teh way!
Posted: Mon Jun 20, 2011 5:46 pm
by CaNsA
Tirpitz wrote:'Ang on a sec. I was thinking of getting a Dynojet kit for mine this coming winter. So are we saying the compatibility to the Micron system applies to ALL Dynojet kits, or just the stage-whateveritis which is for Race cans? The Stage 1 kit is for OEM exhausts, so I'm assuming this does work with the OEM (or similar) system, as I don't intend binning that any time soon?
what?
Re: More bike goodies on teh way!
Posted: Wed Jun 22, 2011 12:29 pm
by Neosophist
Tirpitz wrote:'Ang on a sec. I was thinking of getting a Dynojet kit for mine this coming winter. So are we saying the compatibility to the Micron system applies to ALL Dynojet kits, or just the stage-whateveritis which is for Race cans? The Stage 1 kit is for OEM exhausts, so I'm assuming this does work with the OEM (or similar) system, as I don't intend binning that any time soon?
Yep, need Zimm to clairfy this one, I remember him mentioning it to me, I think it's the ZXR400 dynojet 'race' kit that was designed to work best with the micron system, since the BEET and other BEET clones are different to the micron kit the dynojet kit doesn't work as well with them.
I wouldn't really recommend any of their kits, the standard ZX stuff fuels well enough that a competent dyno tuner should be able to get it setup and running really well.. a better spend of money.