www.zxrworld.co.uk

can anybody tell me correct type and make of the resistor i need to put into race loom thanks tosh

viewtopic.php?f=37&t=4518&hilit=race+loom

It's a 100ohm resistor that goes on the grey wire coming out of the CDI.

You'll know it's working right when there's a 9v voltage going from the gray wire from the CDI to a known good earth. Just been through the same my self trying to diagnose a starting issue.

thanks i will give it a go

mmm not sure now put in resistor and i get 7v so now im confused to say the least

Deswilkie wrote:viewtopic.php?f=37&t=4518&hilit=race+loom

It's a 100ohm resistor that goes on the grey wire coming out of the CDI.

You'll know it's working right when there's a 9v voltage going from the gray wire from the CDI to a known good earth. Just been through the same my self trying to diagnose a starting issue.

thanks its all sorted now,
a dimwit and wiring a lethal combination