www.zxrworld.co.uk

hi what part of the carb do you have to remove to get to the jet?

ideally you need the carbs off the bike, then turn them over and take the bowls off the bottom of the carb and the main jet is the big one in the middle cant remember wether its an 8mm or 10mm hex.
why do you need to get to your main jets?

The jet itself is a flat blade screwdriver to get it out. And 8mm for the brass thingy it screws into

yep your right cargo couldnt remember.........'brass thingy' with the holes in is the emulsion tubes.