www.zxrworld.co.uk

i was just wondering what rearsets people use because the ones i have had far to much play in the levers/pivots and i would like to change them. are the any that fit off other bikes? any help would be much appresiated.
Cheers Ben

Ive got some promach's, they run on roller bearings, so have no play at all.
they aint cheap, but fantastic piece of kit

Are they made for ZXR400's or were they designed for another bike and just have the same hole centers? cant see any listed for a 400.

read you were doing NG this year so will probably see you at brands next weekend.
Cheers Ben

Ben, i think the ses ones are really good.
they dont look fancy, but are really strong. Ive smacked mine on both sides five or six times over the last 2 years, and they still look newish and dont have any sideways play
http://www.sesraceproducts.com/rearsets ... -182-p.asp

i have the "race supplies" ones ...

they're a bit cheap..but they are quite cheap

coley wrote:Are they made for ZXR400's or were they designed for another bike and just have the same hole centers? cant see any listed for a 400.

read you were doing NG this year so will probably see you at brands next weekend.
Cheers Ben

yer i had them made for my bike, so they have the plans for the zxr400 now. you would prob have to ring them.


yes ill be at brands next weekend never been to brands before, so expect some poor lap times, lol

I've got the SES ones and they seem fine.

I suspect that because of the little bearings a bump/crash on a brake lever/gear change lever can end up a bit stiff to use even if it is only slightly bent.

But aside from that theyrrrrrrrrrrrrrrrrrrrreeeeeeeeeeeeeeeeeeeee great

SES.....cheap, no nonsense and good quality

cheers everyone, looks like ses have the vote. Love the look of Simmos Promach ones but way too expensive for me.
Simmo I've not been to Brands before either so have booked the test day before, should be fun
Ben

Show them your video ben let em know whats coming..............................

i was gonna book the test day, but i couldn't afford it at the time, so looks like ill risk it for a biscuit and learn it in the practice. lol

ive been watching endless youtube vids and bsb vids, and will do a few laps on the push bike, thats about as good as it will get for me till race day

Ok Cargo you talked me into it. http://www.youtube.com/watch?v=2El4oATRuE0 NG test weekend at Pembrey, not as quick or as impressive as Ballsout's Brands vid. Have a look at this one Simmo http://www.youtube.com/watch?v=-Gi6a4y6_X0 It's the one I'm watching.
Is Leon doing the 400 race at Brands or just the 600?

well then that onboard by ballsout, that vid dont half make it look really fast

Ha ha, cheers guys. Hope it helps you

If it's of any help, dependng on your gearing/revs, you can go down into second for Druids, and drop to third for Clearways, you can see where the revs drop quite low on those two corners, I found for me that it upset the bike a bit and I try to be smooth, when I tried third and fourth respectively, it didn't slow my lap times but allowed me to get into the corners better with a bit more confidence and speed.

Good luck.

Oh, and Another vote for SES

cheers