Page 1 of 1
Quick action throttle
Posted: Sun Jan 17, 2010 2:39 pm
by Jerry
Hi guys
Does anyone know where I can get a quick action throttle from my one has just broke.
Cheers
Jerry
Re: Quick action throttle
Posted: Sun Jan 17, 2010 2:43 pm
by cargo
try these guys..............
http://www.venhill.co.uk/Home
Re: Quick action throttle
Posted: Sun Jan 17, 2010 4:25 pm
by Jerry
Thanks for that cargo
Re: Quick action throttle
Posted: Sun Feb 28, 2010 11:23 am
by ancozxr
what is the option for the L model ZXR?
Universal kit?
Re: Quick action throttle
Posted: Sun Feb 28, 2010 11:49 am
by cargo
Re: Quick action throttle
Posted: Sun Feb 28, 2010 5:37 pm
by ancozxr
Is a direct replacement to our bikes?
Is ok for the CV carbs?
Re: Quick action throttle
Posted: Sun Feb 28, 2010 5:57 pm
by cargo
Works fine on mine
Just take care to get the lengths right and the routing
Re: Quick action throttle
Posted: Sun Feb 28, 2010 7:37 pm
by Ballsout Racing
Yes, as above. I actually managed to get the original pull cabel to work by cutting off all the plastic from the twistgrip end, however, the whole cable was too short, on full lock it would pull thus opening the throttle. I had venhill make me up a cable 100mm longer and it works great. I haven't used the cable kit but I would imagine that it will work fine.
Re: Quick action throttle
Posted: Mon Mar 01, 2010 7:08 pm
by mark400
We have done three bikes with these and they are terrific ! The universal cable kit has lots of stuff, so just pick out what you need. Once the outer is in place, just make sure the length is excatly right - The kit has nipples with grubscrews to help you ( only needed at the carb end of the cable). We also soldered the grubscrew end of the cable to be really safe - Happy to send a pic or two if you want,
Regards,
Mark