Page 3 of 3

Re: wot other race seat units go on 2 a zxr400???

Posted: Sat Nov 10, 2007 11:59 am
by BANJO
a nice looking cbr one
Image
dean

Re: wot other race seat units go on 2 a zxr400???

Posted: Mon Nov 12, 2007 2:02 pm
by kurty_22
i like the seat unit on the pics that BANJO posted up on the dark blue zxr400 wot model off r6/r1 is that seat unit off any 1 no???plus dose it go stright on 2 the zxr400 sub frame?tho with my bike being a race bike i think my sub frame has been shortend down not sure tho.thanks

Re: wot other race seat units go on 2 a zxr400???

Posted: Tue Nov 13, 2007 7:27 am
by tng21
so who do you take it to once you've bought a r6 ars end to have it fitted then?

Re: wot other race seat units go on 2 a zxr400???

Posted: Tue Nov 13, 2007 9:23 am
by masterofinsanity
fit it yourself you lazy ass. :smt003

Re: wot other race seat units go on 2 a zxr400???

Posted: Wed Nov 14, 2007 6:57 am
by tng21
i wouldnt have a clue where to start if it has to be modded to make it fit though lolsign

Re: wot other race seat units go on 2 a zxr400???

Posted: Wed Nov 14, 2007 9:09 am
by masterofinsanity
when you change the rear seat plastics most people buy a complete subframe to match, but if you're looking to fit it to your zxr subframe then you will have to more than likely chop the subframe and/or make brackets to fit.

Re: wot other race seat units go on 2 a zxr400???

Posted: Mon Nov 19, 2007 12:22 pm
by kurty_22
il probley just end up getting 1 of the 1's from AMS thats for the zxr dose any 1 no if they go straight on 2 the sub frame???

Re: wot other race seat units go on 2 a zxr400???

Posted: Fri Nov 23, 2007 3:38 pm
by kurty_22
[quote="BANJO"]some pics of a zxr 400 with a r6/r1 rear end
Image
Image
Image


also dose any 1 no wot year of R1 or R6 this unit has come off??? confuddled

Re: wot other race seat units go on 2 a zxr400???

Posted: Fri Nov 23, 2007 5:38 pm
by RedexRobB
Look at it carefully and you will notice its half ZXR400 (the front bit) and half R6/R1 (the back bit). My guess is they have plastic welded it together and finished it off nicely.

Re: wot other race seat units go on 2 a zxr400???

Posted: Fri Nov 23, 2007 8:14 pm
by kurty_22
i dont think any of that really looks like my zx 1 m8?it dose look very well tho i muct say!has any1 on here put any different seat units on 2 ther zxr400?if so wot model and was ther much hassel in fitting it???

Re: wot other race seat units go on 2 a zxr400???

Posted: Fri Nov 23, 2007 8:22 pm
by RedexRobB
The bits that offer upto the tank look exactly like the ZXR's.

Re: wot other race seat units go on 2 a zxr400???

Posted: Fri Nov 23, 2007 9:48 pm
by deviant
rob's right, it's a bit of a mongrel tailpiece.

here's an 01 R6 - same tail (albeit with pillion pad). but the front bits are completely different.

Image

whole load more pics here:
http://www.bikepics.com/yamaha/r6/01/pics.asp

however the front of the tailpiece in the photos is clearly standard l-model zxr. look at any photo on the site.

it is very tidily done.

Re: wot other race seat units go on 2 a zxr400???

Posted: Fri Nov 23, 2007 11:15 pm
by kurty_22
RobB wrote:The bits that offer upto the tank look exactly like the ZXR's.

up at the tank/round the sides of the sub frame i think mine is different and covers more of the subframe.

Re: wot other race seat units go on 2 a zxr400???

Posted: Fri Nov 23, 2007 11:19 pm
by RedexRobB
Yeah the standard seat uni covers the subframe, but in that they obviously fancied something different and fancied exposing some of it.