Hi,
I have just entered the world of bikes after passing my test on the 21st sept and have got my self a ZX400G. I have a problem i need an end can to get it through the MOT
and have no idea of the pipe size req any help would be received gratefully many thank.
ZX400 (1988 G reg) Exhaust.
Moderator: Moderators
- rdog87
- Posts: 21
- Joined: Sat Sep 25, 2010 4:59 pm
- My Bike: kawasaki ZX400G (1988)
- Location: Newcastle
ZX400 (1988 G reg) Exhaust.
[i][color=#8080FF]scraapy[/color][/i]
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: ZX400 (1988 G reg) Exhaust.
measure it ? ? ?
- rdog87
- Posts: 21
- Joined: Sat Sep 25, 2010 4:59 pm
- My Bike: kawasaki ZX400G (1988)
- Location: Newcastle
Re: ZX400 (1988 G reg) Exhaust.
do i measure inside or to the outsideof the pipe?
[i][color=#8080FF]scraapy[/color][/i]
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: ZX400 (1988 G reg) Exhaust.
that would depend on if the end can slips on over the link pipe or into the link pipe...................
this is basic stuff use those little grey cells up there in your head
this is basic stuff use those little grey cells up there in your head