Got a brembo mc from a 95 rs250 off ebay. went to fit it tonight and had an issue with it. problem is that can't move the lever due to the switchgear being in the way. i have seen zxr's with the brembo mc on before so does anyone have an idea of how to get round this problem?
any wise words appreciated
cheers
john
RS250 front MC
Moderator: Moderators
-
- Posts: 12
- Joined: Wed Feb 18, 2009 1:54 pm
- My Bike: Kawasaki ZXR 400 L9
- Location: wirral/ stafford for uni
-
- Posts: 72
- Joined: Wed May 05, 2010 4:12 pm
- My Bike: ZXR 400
Re: RS250 front MC
Is it for a race bike or road bike. On my race bike I put the switch gear onto the left hand clip on.
- jake
- zxr400 oc member
- Posts: 1016
- Joined: Mon Oct 02, 2006 10:03 pm
- My Bike: tomos moped
- Location: wirral
Re: RS250 front MC
like above or get an nc30 killswitch/starter
-
- Posts: 12
- Joined: Wed Feb 18, 2009 1:54 pm
- My Bike: Kawasaki ZXR 400 L9
- Location: wirral/ stafford for uni
Re: RS250 front MC
it's for my road bike. does the nc30 switch gear definatly allow the lever to move freely?
- jake
- zxr400 oc member
- Posts: 1016
- Joined: Mon Oct 02, 2006 10:03 pm
- My Bike: tomos moped
- Location: wirral
Re: RS250 front MC
Aye. Works on the racebike. I use it because of the quick action throttle. Im not sure about what fits what on zxr roadbikes with regards to clock clearance,etc.... and i havent got a clue of roadbike electrics with changing the switchgear, i cant see there being any problems that cant be solved tho
Btw, are we talking a brembo off the honda RS? or an aprilia?
Btw, are we talking a brembo off the honda RS? or an aprilia?
-
- Posts: 12
- Joined: Wed Feb 18, 2009 1:54 pm
- My Bike: Kawasaki ZXR 400 L9
- Location: wirral/ stafford for uni
Re: RS250 front MC
it's an aprilia mc