had a small off the other day. replaced the gear lever and altenator cover. clutch seems moved a little. wont start now, just a click coming from under the seat when i hit the start button. i really appreciate any help
please help!
wont start, click from under seat
Moderator: Moderators
-
- Posts: 17
- Joined: Wed Mar 24, 2010 9:31 am
Re: wont start, click from under seat
might it be the oil pressure switch taking a while to come back on after filling it up again? also the sidestand switch was already disabled...
-
- Posts: 17
- Joined: Wed Mar 24, 2010 9:31 am
Re: wont start, click from under seat
whats the starter lockout switch mentioned in the manual? on the left bar??? or was the killswitch on the left on the h model? anyone?
- extonyg
- zxr400 oc member
- Posts: 405
- Joined: Tue May 12, 2009 9:40 pm
- My Bike: zxr 400 L1 uk
- Location: Portsmouth
Re: wont start, click from under seat
make sure its not in gear...........clicking under the seat sounds like starter soleniod.have you taken the seat and rear panels off?if not have a quick look make sure fuse hasnt blown or wires have come off it.
-
- Posts: 17
- Joined: Wed Mar 24, 2010 9:31 am
Re: wont start, click from under seat
after a good few attempts of hitting the start button for a second, it made a pretty load noise then worked fine. think the cog between the flywheel and starter mustve been slightly off from changing the altenator cover and the noise was it getting back into place...