Hi guys
Does anyone know where I can get a quick action throttle from my one has just broke.
Cheers
Jerry
Quick action throttle
Moderator: Moderators
-
Jerry
- Posts: 32
- Joined: Mon Dec 10, 2007 8:05 pm
- My Bike: ZXR400 Race bike
-
cargo
- zxr400 oc member

- Posts: 3342
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
-
Jerry
- Posts: 32
- Joined: Mon Dec 10, 2007 8:05 pm
- My Bike: ZXR400 Race bike
Re: Quick action throttle
Thanks for that cargo
- ancozxr
- zxr400 oc member

- Posts: 101
- Joined: Mon Mar 01, 2004 5:10 pm
- My Bike: ZXR 400 Track, FMX 650
- Location: Athens - Greece
Re: Quick action throttle
what is the option for the L model ZXR?
Universal kit?
Universal kit?
Racing for the fearless....!!!!


-
cargo
- zxr400 oc member

- Posts: 3342
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
- ancozxr
- zxr400 oc member

- Posts: 101
- Joined: Mon Mar 01, 2004 5:10 pm
- My Bike: ZXR 400 Track, FMX 650
- Location: Athens - Greece
Re: Quick action throttle
Is a direct replacement to our bikes?
Is ok for the CV carbs?
Racing for the fearless....!!!!


-
cargo
- zxr400 oc member

- Posts: 3342
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: Quick action throttle
Works fine on mine
Just take care to get the lengths right and the routing
Just take care to get the lengths right and the routing
- Ballsout Racing
- L-plate hell

- Posts: 385
- Joined: Sun Nov 07, 2004 11:04 am
- My Bike: tomos moped
- Location: Most race circuits ;-)
Re: Quick action throttle
Yes, as above. I actually managed to get the original pull cabel to work by cutting off all the plastic from the twistgrip end, however, the whole cable was too short, on full lock it would pull thus opening the throttle. I had venhill make me up a cable 100mm longer and it works great. I haven't used the cable kit but I would imagine that it will work fine. 
- mark400
- Posts: 208
- Joined: Fri Feb 06, 2009 11:48 pm
- My Bike: Building an original SP
Re: Quick action throttle
We have done three bikes with these and they are terrific ! The universal cable kit has lots of stuff, so just pick out what you need. Once the outer is in place, just make sure the length is excatly right - The kit has nipples with grubscrews to help you ( only needed at the carb end of the cable). We also soldered the grubscrew end of the cable to be really safe - Happy to send a pic or two if you want,
Regards,
Mark
Regards,
Mark
NG Road Racing Champion 2012 400SS