Engine mount and rad bracket

[trev400]

Hi

At present Im rebuilding a ZXR400 H from a box, but there are a few, well loads of bits that are missing such as most the brackets.

This isn't a real problem as I'm quite handy with steel and can make my own, but I'm struggling with the engine mount/rad bracket, could anyone help me with the diamensions of this bracket, so then I can look a doing a mod to it so I can lower the rad to fit a ram air box into the H model.

Im at present developing my own rearsets and making the sub-frame base for the electrics, pics to follow once painted...

Trev

[neil_cb125t]

see my thread re cutting radiators - i have moved my rad down H1 for ram air box feed

[trev400]

Cheers mate,

All I need now is the measurements for the brackets so I can get the rad in the right location to the engine and front wheel

Trev

[jake]

i will have a set for sale if you want them.
15 quid posted.

[trev400]

I would buy them of you, but I have the steel here in my shed ready to be cut and drilled once I can get the measurements....