Front Master Cylinder
Moderator: Moderators
-
rene
- zxr400 oc member

- Posts: 1918
- Joined: Fri Feb 23, 2007 10:34 am
- My Bike: kwack ZXR750L1
- Location: Northampton
Re: Front Master Cylinder
im not going to argue because im to hung over but no are calipers are wa*k, they fade like made when pushing hard as well as giving no feel and not hugly powerfull eaither.
tbh from what you and others have made out id expect 1920's drum brakes would still impress you if they look nice. You dont ride on track or push your bike overly hard (as said by you plenty of times) unlike me who dos ride on track and dos try to ride fast thus im in a better postion to say if the calipers are good or not, and no the standard 6 pots on are bikes are wa*k.
tbh from what you and others have made out id expect 1920's drum brakes would still impress you if they look nice. You dont ride on track or push your bike overly hard (as said by you plenty of times) unlike me who dos ride on track and dos try to ride fast thus im in a better postion to say if the calipers are good or not, and no the standard 6 pots on are bikes are wa*k.
ZXR750 L1
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
- masterofinsanity
- Site Admin

- Posts: 8111
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Front Master Cylinder
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- masterofinsanity
- Site Admin

- Posts: 8111
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Front Master Cylinder
hey Rene have you put zx7r 6 pots on your zxr750 then?
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- Gemini
- cloning technology

- Posts: 1323
- Joined: Fri Nov 15, 2002 1:57 pm
- My Bike: CBR1000RR4 Fireblade
- Location: Shrewley, Warwickshire
Re: Front Master Cylinder
thats fine mate,
i've never said im a track rider, i would never take my bike on a track cuz i wouldnt wanna bin it with void insurance
on the road, my brakes are 100 times better since i added the brembo mc, and i can pull the 7r up using one finger in as short a distance as pretty much any other sports bike out there - which is impressive being that my bike weighs as much as the average family car!
i think this is an area where we should agree to disagree. maybe if i put my bike on the track the brakes would be awful, but this site is primarily made up of road riders so i feel my experience and advice is just as valid
in regards to shifting your stinking hangover, i suggest a macdonalds brekkie!

gem
i've never said im a track rider, i would never take my bike on a track cuz i wouldnt wanna bin it with void insurance
on the road, my brakes are 100 times better since i added the brembo mc, and i can pull the 7r up using one finger in as short a distance as pretty much any other sports bike out there - which is impressive being that my bike weighs as much as the average family car!
i think this is an area where we should agree to disagree. maybe if i put my bike on the track the brakes would be awful, but this site is primarily made up of road riders so i feel my experience and advice is just as valid
in regards to shifting your stinking hangover, i suggest a macdonalds brekkie!

gem
There's No Explanation For The Way I'm About To Behave!!!
-
rene
- zxr400 oc member

- Posts: 1918
- Joined: Fri Feb 23, 2007 10:34 am
- My Bike: kwack ZXR750L1
- Location: Northampton
Re: Front Master Cylinder
nope there GSXR1000 calipers, although they look alot the same there FAR better they used better quility parts and a far better desighn. Plus the mount spacing is bigger. If i could afford them id buy ZX7RR nissin calipers for the TL (same spacing as the zx7r) as they are lovely looking and very powerfull, they also used them on the MV F4 but different spacing. Very few of them floating about tho due to them only going on the sp model.masterofinsanity wrote:hey Rene have you put zx7r 6 pots on your zxr750 then?
Cheers for the tip gem think i'll head over for egg and bacon muffin asap
ZXR750 L1
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
- masterofinsanity
- Site Admin

- Posts: 8111
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Front Master Cylinder
Stick me down for 1rene wrote:
Cheers for the tip gem think i'll head over for egg and bacon muffin asap
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- Gemini
- cloning technology

- Posts: 1323
- Joined: Fri Nov 15, 2002 1:57 pm
- My Bike: CBR1000RR4 Fireblade
- Location: Shrewley, Warwickshire
Re: Front Master Cylinder
if you cant get to macdonalds then do yourself something like this...

gem

gem
There's No Explanation For The Way I'm About To Behave!!!
-
rene
- zxr400 oc member

- Posts: 1918
- Joined: Fri Feb 23, 2007 10:34 am
- My Bike: kwack ZXR750L1
- Location: Northampton
Re: Front Master Cylinder
i actually feel i'll looking at that but crave the grease so bad, drinking till 5.45 in the morning then going to work at 8.30 is not good at all..
ZXR750 L1
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
- masterofinsanity
- Site Admin

- Posts: 8111
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Front Master Cylinder
thats it i'm gonna do a fry up tonight!
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
cargo
- zxr400 oc member

- Posts: 3342
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: Front Master Cylinder
One really effective way of improving the braking performance of your bike is to avoid fry ups and the big golden M
Less weight means less energy to disapate from any given speed...................................lighter is faster................. fat lardy boys are slow
So lose weight and go fast..............................spin spin spin
Less weight means less energy to disapate from any given speed...................................lighter is faster................. fat lardy boys are slow
So lose weight and go fast..............................spin spin spin
- masterofinsanity
- Site Admin

- Posts: 8111
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Front Master Cylinder
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.