Hello all!
Recently bought a projext zxr 400 l4 and of the many jobs that need doing the rear shock and/or linkage is seized solid. Any tips on supporting the bike whilst removing the rear shock and linkage?
Cheers,
Chris.
Re: Rear Shock removal
Moderator: Moderators
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Rear Shock removal
Hang it by the subframe from the ceiling if you can. Loosen the bolts first tho then do it.
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Rear Shock removal
trolley jack under the engine then axle stands under the frame.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- Posts: 3
- Joined: Tue Apr 15, 2008 9:00 pm
Re: Rear Shock removal
when i jacked my zxr up i used some rachet straps ,i placed them throught the handles on the under side of my subframe and connected it to the roof beem in my garage
worked a treat
worked a treat