coil screw rubbers
Moderator: Moderators
-
- Posts: 28
- Joined: Fri Aug 28, 2015 4:08 pm
- My Bike: ZXR400 H1
- Location: sheffield
coil screw rubbers
hi
does anyone know the part number for the rubbers that the bolts screw into that hold the coils in place, they were in the frame when i had it powder coated and now there not...ive checked the microfiche but the holes where they fit in the frame are not shown...
does anyone know the part number for the rubbers that the bolts screw into that hold the coils in place, they were in the frame when i had it powder coated and now there not...ive checked the microfiche but the holes where they fit in the frame are not shown...
- Tirpitz
- zxr400 oc member
- Posts: 766
- Joined: Sun Dec 12, 2010 2:45 pm
- My Bike: Kawasaki ZXR400L4
- Location: Doncaster, South Yorkshire
Re: coil screw rubbers
I doubt that they are available as a spare part. All that they are is a rubber grommet with a brass threaded insert. I would look at replacing the missing items with wellnuts - easily available on Fleabay in whatever diameter you need to match the coil securing bolts. This will do exactly the same job.
ZXR400 L4, purple / black / pink
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock
-
- Posts: 22
- Joined: Tue Mar 04, 2014 11:35 am
- My Bike: ZXR400
-
- Posts: 28
- Joined: Fri Aug 28, 2015 4:08 pm
- My Bike: ZXR400 H1
- Location: sheffield
Re: coil screw rubbers
Thanks for that..
- Tirpitz
- zxr400 oc member
- Posts: 766
- Joined: Sun Dec 12, 2010 2:45 pm
- My Bike: Kawasaki ZXR400L4
- Location: Doncaster, South Yorkshire
Re: coil screw rubbers
Just remember with these that there are top-hat shaped spacers which sit between the coil and the frame and through which the mounting bolts pass. The 'rim' of the top-hat presses against the frame (or is it against a bracket? - but you get the point) making the earth connection through the coil. If the well nut rim prevents this top-hat touching the frame you will need to trim it with a knife to suit.
ZXR400 L4, purple / black / pink
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: coil screw rubbers
check the microfiche they are there!Bobbarian wrote:hi
does anyone know the part number for the rubbers that the bolts screw into that hold the coils in place, they were in the frame when i had it powder coated and now there not...ive checked the microfiche but the holes where they fit in the frame are not shown...
http://zxrworld.co.uk/index.php/downloa ... gnition-61#
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- Posts: 28
- Joined: Fri Aug 28, 2015 4:08 pm
- My Bike: ZXR400 H1
- Location: sheffield
Re: coil screw rubbers
the "top hats" on the fiche are metal,its the rubber ones that are seated in the frame that i want,i dont think they earth the coils as there made of rubber..you can see in the picture on the bottom one(far right) the rubber "top hat" is seated in the frame...
-
- Posts: 28
- Joined: Fri Aug 28, 2015 4:08 pm
- My Bike: ZXR400 H1
- Location: sheffield
-
- Posts: 28
- Joined: Fri Aug 28, 2015 4:08 pm
- My Bike: ZXR400 H1
- Location: sheffield
Re: coil screw rubbers
the well nuts arrived and fit perfectly.....many thanks manxman.....
-
- Posts: 22
- Joined: Tue Mar 04, 2014 11:35 am
- My Bike: ZXR400
Re: coil screw rubbers
Bobbarian wrote:the well nuts arrived and fit perfectly.....many thanks manxman.....
- Tirpitz
- zxr400 oc member
- Posts: 766
- Joined: Sun Dec 12, 2010 2:45 pm
- My Bike: Kawasaki ZXR400L4
- Location: Doncaster, South Yorkshire
Re: coil screw rubbers
Ignore what I said about trimming off the rubbers, I'm just mucking about with mine now after doing the valves. The mounting bolt goes straight through the rubbers and grounds on the frame behind from what I can see. Nothing to do with the top hats seating at all. So just bung in the well nuts and away you go.
ZXR400 L4, purple / black / pink
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock
- Tirpitz
- zxr400 oc member
- Posts: 766
- Joined: Sun Dec 12, 2010 2:45 pm
- My Bike: Kawasaki ZXR400L4
- Location: Doncaster, South Yorkshire
Re: coil screw rubbers
Disregard anything I said about the coils earthing in any way through the mounting bolts - utter BS Many thanks to my three-leafed instructor for putting me straight
ZXR400 L4, purple / black / pink
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock