Good day to you all,
A few of the screws in my right fairing have fallen out, I am buying some on Ebay at the minuite and was just wondering are the fairing screws in the side, 30/35 or 40mm
Thanks.
Fairing Screws
Moderator: Moderators
- banner001
- Track day God
- Posts: 2591
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Fairing Screws
the 3 large fairing screws are M6x30mm (1.00mm thread pitch)
this is what happens at 100mph+ if the screws are not in properly/not there...i are a tool sometimes
viewtopic.php?f=1&t=14129
this is what happens at 100mph+ if the screws are not in properly/not there...i are a tool sometimes
viewtopic.php?f=1&t=14129
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 4
- Joined: Sun Aug 12, 2012 7:59 am
- My Bike: Zxr400
Re: Fairing Screws
Cheers bud, Oh jeeez, I would cry if that happened to my fairings, I'm still on the traditional red & black colours, need to get some pics uploaded soon :}
Hope you got it sorted
Hope you got it sorted
- banner001
- Track day God
- Posts: 2591
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Fairing Screws
well its araldited back together...couldnt believe it. one of the main screws must have worked loose, the small hex one by the oil cooler broke a while back, and i had lost one by the indicator...so it was kind of my own fault for not replacing them...guess what mistake i WONT make again!
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 7
- Joined: Mon Jul 16, 2012 9:28 pm
- My Bike: zxr400
Re: Fairing Screws
Hi All,
I have a L2 model and was looking for a list of the fairing screws and possbile place to get them from as a set. I've seen a kit on ebay of stainless steel ones but there aren't any in black and I'm not sure if all the screws are in that pack anyway.
Thanks.
I have a L2 model and was looking for a list of the fairing screws and possbile place to get them from as a set. I've seen a kit on ebay of stainless steel ones but there aren't any in black and I'm not sure if all the screws are in that pack anyway.
Thanks.
- Mavve750
- Posts: 62
- Joined: Fri Jul 18, 2008 3:11 pm
- My Bike: 5 ninjas and one R1.
- Location: Sweden
Re: Fairing Screws
I bought all new original screws from Kawasaki and it wasn't that expensive either. It made the world of difference.
I also bought all the fairing brackets that holds the fairings. The bike looks soooo shiny now
I also bought all the fairing brackets that holds the fairings. The bike looks soooo shiny now
-
- Restricted
- Posts: 825
- Joined: Fri Aug 26, 2011 9:31 pm
- My Bike: zxr 400 l6
Re: Fairing Screws
viewtopic.php?f=55&t=368
i just got mine off ebay with loads of rubber washers to stop damage to paint and loctited them in
i just got mine off ebay with loads of rubber washers to stop damage to paint and loctited them in