Hi guys, i'm 6ft, with slightly longer than normal legs.
Ive read that the ride height can be adjusted on the rear shock, so i dug out this picture;
Is the bolt on the left of the pic the ride height adjuster bolt? Does the seat have to be removed?
Adjusting ride height
Moderator: Moderators
-
- Posts: 93
- Joined: Sun Feb 03, 2013 11:39 pm
- My Bike: ZXR 400 L9
- Location: Hertfordshire
-
- Posts: 10
- Joined: Sun Jul 22, 2012 8:05 pm
- My Bike: zxr400l
Re: Adjusting ride height
Yes it is that 22mm nut. Remove the rear seat and the LH seat panel. Loosen the 22mm top locknut under the seat after removing the split pin. You'll be able to jack it up slightly using a 22mm open ended spanner, but make sure you leave enough room to get the split pin back in.
-
- L-plate hell
- Posts: 307
- Joined: Sat Aug 02, 2008 4:29 pm
Re: Adjusting ride height
Are you adjusting ride height because you're tall? If you raise the rear the bike will turn quicker, raise it too much it will get very twitchy. It also affect the swingarm angle which in turn affects bike handling.