www.zxrworld.co.uk

Hi guy,

Has any of you tried to fit a ZX6R rear shock? Will it fit and is it any good?

Thanks,

Roy

fitted the 636 one but not tried it out yet

did it fit straight away or did you do any mod's?

i have one fitted and it fitted strainght in a have a pic in the build thread bit the only trouble im having is is to hard, coz the 400 is alot lighter then the 636 but im talking to k-tech bout it to sort it i hope

We also have a zx6r shock in one of our bikes. We had it re sprung by Maxton (about £70) as it was too stiff. We also had to cut away a bit of the battery tray, but we use a smaller NC30 battery anyway, so this has no negative effects.

Sounds good guys, thanks for the info. Maybe it's also an option to fit a H model link to make it a bit softer..

mark400 wrote:We also have a zx6r shock in one of our bikes. We had it re sprung by Maxton (about £70) as it was too stiff. We also had to cut away a bit of the battery tray, but we use a smaller NC30 battery anyway, so this has no negative effects.

Do you know what weight spring you had fitted Cheers

spoke to k tech today phil and they recomended i fit a 80 or 85 so i have bought the 85 being a fat 14 stoner so hope this works at the weekend see u at cadwell

Cheers Mate I got a 72.5 off them today as thats the closest they had for an ohlins but I'm 11 stone so should be ok See you saturday.
Cheers Phil