Page 1 of 1

fitting a amb transponder

Posted: Thu Sep 15, 2005 11:26 am
by Highlander
Hi,

The instructions that came with it are not to clear... do they have to have a non obstrcutive view to the track... wheres best place to fit them?

Cheers

Posted: Thu Sep 15, 2005 7:29 pm
by sloweracing
I have fitted mine on the right hand fork leg

Where you have the fork seals 2in above on the top section of the fork leg just put a bit of rubber on the fork leg then 2 cable ties to hold it on wont slide down as the fork leg gets bigger nearer the fork seals

So follow the clip ons down the fork leg then any where just check it does not catch on any thing if you turn the steering

Hope this helps