FCR Carb rubbers
Posted: Wed Oct 28, 2009 5:23 pm
Have a set of 33mm FCR's but no matching carb rubbers - which seem to be like rocking horse toad. The original CV rubbers are too small - anyone solved this problem before?? 
Page 1 of 1
Re: FCR Carb rubbers
Posted: Wed Oct 28, 2009 5:38 pm
Yip give the fcr's to me
Re: FCR Carb rubbers
Posted: Wed Oct 28, 2009 6:59 pm
Hey Robbie - why didnt I think of that - SimplesRobbie wrote:Yip give the fcr's to me
Got the list of race dates for Melville Club thorugh the door today - Roll on next season
Re: FCR Carb rubbers
Posted: Wed Oct 28, 2009 7:40 pm
I got mine from cradley kawasaki about £35 a set
Re: FCR Carb rubbers
Posted: Wed Oct 28, 2009 8:15 pm
Thanks for that - will call em tomorrowluckyeddie wrote:I got mine from cradley kawasaki about £35 a set
Re: FCR Carb rubbers
Posted: Thu Oct 29, 2009 10:20 pm
Inflation has set in - now £60 / set :smt013luckyeddie wrote:I got mine from cradley kawasaki about £35 a set
Re: FCR Carb rubbers
Posted: Fri Oct 30, 2009 8:28 pm
i only got mine 2 may be 3 months back a set for me and set for a mate
£8 odd each £35 per set .
£8 odd each £35 per set .
Re: FCR Carb rubbers
Posted: Fri Oct 30, 2009 9:16 pm
I hope cradley havent started a new policy of random ripoffness as i still havent got over paying nearly 40 quid or whatever it was now for my front wheel bearings!
that said, i did need them.. and as usual they where on my doorstep the next day.
that said, i did need them.. and as usual they where on my doorstep the next day.
Re: FCR Carb rubbers
Posted: Sat Oct 31, 2009 9:21 am
For bearings I usually go to bearing suppliers like these: http://simplybearings.co.uk/shop/ball_b ... 7Qod2mM29g 
£40 is just a rip off!
My flatslides go into my CV rubbers, it's a bit of an effort, but they do go in
£40 is just a rip off!My flatslides go into my CV rubbers, it's a bit of an effort, but they do go in
Re: FCR Carb rubbers
Posted: Sun Nov 01, 2009 6:24 pm
Ballsout Racing wrote:For bearings I usually go to bearing suppliers like these: http://simplybearings.co.uk/shop/ball_b ... 7Qod2mM29g
My flatslides go into my CV rubbers, it's a bit of an effort, but they do go in
Lightly grease or oil the rubbers and they will go in, when you take the carbs back off the rubbers usually pull out of their housing though. (not a problem)
Re: FCR Carb rubbers
Posted: Wed Nov 18, 2009 6:33 am
yeah very little mods required.. you can open them up a little but bit o rubber grease and its all god - lube is the key!!
Re: FCR Carb rubbers
Posted: Wed Nov 18, 2009 6:37 am
There's always time for lubrication.....
Re: FCR Carb rubbers
Posted: Thu Nov 19, 2009 1:36 am
Part # 16065-1241 x 4 = 3,696 YenDavw wrote:Have a set of 33mm FCR's but no matching carb rubbers - which seem to be like rocking horse toad. The original CV rubbers are too small - anyone solved this problem before??
Part # 92068-006 x 4 = 672 yen
About £30 for the inlet rubbers and the vacuum block off caps.
You do get 38 & 40mm inlet , 38 are OK for the CVK rubbers but I wouldn't be forcing the 40 in there as all you'll do is reduce the intake size.
MM!