ZXR400 race package
Posted: Tue Oct 13, 2009 8:14 pm
ZXR400 race/track bike
66 real BHP (in bike)
Engine – SP adjustable cams, gas flowed and ported head, balanced con rods, skimmed head, base gasket removed and sealed.
Beet titanium headers
Stubby end can with removable baffle
H C Racetech ram air box fitted and carbs jetted to suit.
Total loss electrics
Good battery
Race Loom, (kill switch fires up ignition)
Quick action fuel cap (no keys needed on track/race day)
H model brakes (bigger pad surface area)
EBC HH pads
Goodrich braded hoses
Fire blade master cylinder
Quick action throttle
K-tech gsxr 6 cartridge fork internals
Digital dash
Scitsu capillary temperature gauge
Rear sets
Swing arm bobbins for paddock stand
Renthal sprockets
Crash mushrooms
Steering damper
Dragon supercorse tires
wets on wheels
The bodywork and screen on the bike are tatty and would need repairing or replacing for the bike to be mint but are perfectly useable for you to race or do track days
I also have a comprehensive spares package available which consists of –
A spare rolling chassis almost ready to race
Spec - standard engine, Ram air, Swing arm bobbins, Michelin power race tires
virtually All the bike needs is a fairing and its track ready
.Race engine (not fitted since last season-
This made a genuine 70 BHP-
Flowed and ported cylinder head with triple angle valve seat cut, new valve stem seals, Kent adjustable cams, 0.5 overbore, nearly new rings, lightened and balanced crank, balanced 1208 con rods, no starter motor/flywheel. Total loss.
Also
Another spare chassis with log book
Fiberglass tank cover (to remove tank and use with 5 liter auxiliary fuel tank)
Stainless exhaust headers
Spare bore
Spare cylinder head + spare flowed and ported by NM tuning head (needs cam journal repairing)
2 sets of forks
Swing arm
Engine covers
Clutches
Fly wheels
Various other bits and pieces like water pumps, fuel pumps, sumps bolts, oil pumps, standard pistons/ring, 0.5 over pistons rings(probably stuff I’ve forgot)
H model chassis with road bodywork/tank (Tatty)
£3000 for every bit of zxr400 I have.
Am willing to sell stuff separately, but would prefer to sell as a job lot
Any questions e-mail me or call 07801287088
66 real BHP (in bike)
Engine – SP adjustable cams, gas flowed and ported head, balanced con rods, skimmed head, base gasket removed and sealed.
Beet titanium headers
Stubby end can with removable baffle
H C Racetech ram air box fitted and carbs jetted to suit.
Total loss electrics
Good battery
Race Loom, (kill switch fires up ignition)
Quick action fuel cap (no keys needed on track/race day)
H model brakes (bigger pad surface area)
EBC HH pads
Goodrich braded hoses
Fire blade master cylinder
Quick action throttle
K-tech gsxr 6 cartridge fork internals
Digital dash
Scitsu capillary temperature gauge
Rear sets
Swing arm bobbins for paddock stand
Renthal sprockets
Crash mushrooms
Steering damper
Dragon supercorse tires
wets on wheels
The bodywork and screen on the bike are tatty and would need repairing or replacing for the bike to be mint but are perfectly useable for you to race or do track days
I also have a comprehensive spares package available which consists of –
A spare rolling chassis almost ready to race
Spec - standard engine, Ram air, Swing arm bobbins, Michelin power race tires
virtually All the bike needs is a fairing and its track ready
.Race engine (not fitted since last season-
This made a genuine 70 BHP-
Flowed and ported cylinder head with triple angle valve seat cut, new valve stem seals, Kent adjustable cams, 0.5 overbore, nearly new rings, lightened and balanced crank, balanced 1208 con rods, no starter motor/flywheel. Total loss.
Also
Another spare chassis with log book
Fiberglass tank cover (to remove tank and use with 5 liter auxiliary fuel tank)
Stainless exhaust headers
Spare bore
Spare cylinder head + spare flowed and ported by NM tuning head (needs cam journal repairing)
2 sets of forks
Swing arm
Engine covers
Clutches
Fly wheels
Various other bits and pieces like water pumps, fuel pumps, sumps bolts, oil pumps, standard pistons/ring, 0.5 over pistons rings(probably stuff I’ve forgot)
H model chassis with road bodywork/tank (Tatty)
£3000 for every bit of zxr400 I have.
Am willing to sell stuff separately, but would prefer to sell as a job lot
Any questions e-mail me or call 07801287088