Stick coils
Posted: Tue Nov 23, 2021 9:43 am
SO i note a few people have used stick coils on their ZXRs. There seem to be a mix of choices, namely CBR600RR sticks with CBR sub loom.
Can anyone explain the process of wiring them in. My coils have had it and i wanted to go down this route but electrical stuff is not really my strong area. I am happy to give it a go, but could do with some steerers. Anyone who has done it got a basic wiring diagram?
I assume you plug the CBR loom (or other donor) into the wiring that feeds the existing/old ZXR coils? That would be 2 sets of 2 wires with the spade connectors on the ends? Did you make a plug type connector to connect into the CBR loom?
Pics please
Can anyone explain the process of wiring them in. My coils have had it and i wanted to go down this route but electrical stuff is not really my strong area. I am happy to give it a go, but could do with some steerers. Anyone who has done it got a basic wiring diagram?
I assume you plug the CBR loom (or other donor) into the wiring that feeds the existing/old ZXR coils? That would be 2 sets of 2 wires with the spade connectors on the ends? Did you make a plug type connector to connect into the CBR loom?
Pics please