Page 1 of 1
race can
Posted: Mon Aug 13, 2007 2:25 am
by zxrnewbie
hi i just aquired a race can for my zxr400 and what i was wondering is how do i fit it as ive noticed the standard can has 2 bolts holding in on while the race can has 3 bolts i was was wondering how i go about fitting the new can if is possible
thanks john
Re: race can
Posted: Mon Aug 13, 2007 4:00 am
by RedexRobB
Hi there welcome to the forum
The standard can should also have three bolts holding it in place, check round where the bolts are and try and find a third, maybe its round the back and you cant see it because the pipe is in the way? If you have any pictures post em up.
Re: race can
Posted: Mon Aug 13, 2007 9:52 am
by masterofinsanity
or maybe 1 of them has fell out?
Re: race can
Posted: Tue Aug 14, 2007 3:25 pm
by zxrnewbie
had a look around the original can and theres only 2 bolts 1 at the top and the other at the bottom so any ideas
Re: race can
Posted: Tue Aug 14, 2007 3:45 pm
by deviant
well that's quite wierd!
The body of your can is quite definitely standard kawasaki. but the end isnt...
I don't really know what to suggest. Other than pull it apart and try to figure out how it's been modified from standard.
Re: race can
Posted: Tue Aug 14, 2007 4:07 pm
by The Pole
Could it be a false flange on the end of the pipe? am sure that on mine the bolts sit proud where as that looks more flush. my thoughts are that if you undid those 2 bolts you would find that piece falls away and reveals what should be seen. the original flange with 3 bolts that sits in the bottom of the can itself.
Re: race can
Posted: Wed Aug 15, 2007 8:11 am
by RedexRobB
Thats right its a false flange, very rare to see them still there actaully, first time ive ever seen a ZXR with one still on it! Ive got one on my 7R which vibrated loose and fell off somewhere, which i expect thats what happens to most of them
All you need to do is unscrew that and the bolts for the can should present themselves
Re: race can
Posted: Wed Aug 15, 2007 11:26 pm
by zxrnewbie
thanks everyone it was a false flange then the normal 3 bolts underneath
Re: race can
Posted: Wed Aug 15, 2007 11:31 pm
by The Pole
Holy crap! I was useful? not sure if this has happened before....
Re: race can
Posted: Thu Aug 16, 2007 7:04 am
by RedexRobB
The Pole wrote:Holy crap! I was useful? not sure if this has happened before....
1 useful post in 81, well done mate
Re: race can
Posted: Thu Aug 16, 2007 9:21 am
by deviant
RobB wrote:The Pole wrote:Holy crap! I was useful? not sure if this has happened before....
1 useful post in 81, well done mate
some of us have got to ten times that and not said anything useful yet
Re: race can
Posted: Thu Aug 16, 2007 9:43 am
by rene
was about to say 1 out 80 posts to be usfull has got to get him in the top 10 of usfull posters!
Re: race can
Posted: Thu Aug 16, 2007 7:13 pm
by The Pole
LMFAO! I feel ever so proud of myself.
I will try not to do it again though...would hate to make a name for myself.