www.zxrworld.co.uk

Anyone know of any companies making stainless steel full system exhausts?

I'd prefer straight through pipes to release a little extra power. (I am aware I'll have to tweak the fuelling.)
Bonus points if they take slip on cans rather than having a mounting plate.

sandy bike spares

Cheers!

How does the mounting plate affect choice of can?

sandy pipes are 52mm outer diameter and come with a removable 3-bolt adaptor plate, so you can use 52mm slip-on cans, or you can use (as stock) 72-~69mm centre-to-centre distances for 3-bolt cans, if you fancy a bit of work with a drill, you can accomodate 75mm centre-to centre bolt holes, and can go down to ~65mm centre-to-centre if necessary.

Right. I want a slip-on system to expand my choice of end can.

Any suggestions?

Also, I spoke to MHP.
4-6 weeks for a full system in stainless steel with an ally can.
Will set you back just short for £1k.

You Wont get much better than MHP. I wouldnt use anything else for quality and performance.

I agree that MHP kicks ass but I don't have £1000 to spend on an exhaust

I need a road legal stainless steel system that will take a slip-on can.
I'd prefer to buy new but I'd settle for something used in good condition.

That's a race system.
I need a road legal one.

I have a Micron system on mine and it's never been an issue on the roads

I'm not concerned with it being marked road legal and all that jazz.

I'm 33bhp restricted so it's important it doesnt go over so I can get a certificate.

why do you want a full system with 33bhp restriction? it will probably push you a small bit over, just wait your 2 years out and then fit whatever you want...

I want a stainless system because mild steel rots like a bitch!
I''ve decided to get it restricted and certified and THEN fit the stainless system.

Not exactly legal but it'll be better than pipes with holes in them!

ah good old ignore list...