www.zxrworld.co.uk

Posted: **Sun Jan 08, 2006 11:45 am**

Can anybody tell me how you remove the standard can off the H2?
I cant see any bolt holes etc, all i can see is sum rivets. Do i need to drill them out?
http://img.photobucket.com/albums/1003/ ... oy/can.jpg
cheers
Ian

Posted: **Sun Jan 08, 2006 9:08 pm**

sry, this might be a stupid reply, as i dont have any experince with the H model. But, have you tried just slipping the can off? it could be a slip on... if not then I have no idea, as your picture shows its got no bolt from the pipe work onto the can, only the rivits, but then if it was rivitted on then thats a bit daft..... sry if this is of no help....

Posted: **Mon Jan 09, 2006 6:11 pm**

Just had a go at slippin it off but it dident wanna budge
Cheers for relpy highlander

Posted: **Tue Jan 10, 2006 5:24 pm**

got any photos

Posted: **Tue Jan 10, 2006 5:25 pm**

sorry didnt look at the link.
well im have no idea how that is on.

Posted: **Tue Jan 10, 2006 9:02 pm**

http://www.zxrworld.co.uk/images/hmicro ... xhaust.gif

It looks like one of those covers that go over the flange, no idea how they are fixed on, perhaps they just prise out??

Posted: **Tue Jan 10, 2006 9:08 pm**

That cover should be held on with a 6mm allen bolt, remove that and there's 3 13mm nuts underneath holding the can on

Posted: **Tue Jan 10, 2006 11:19 pm**

evil, i had one excately like that on my H2, and i could not get the thing off for love nor money, so i did what any sensible person would do in the circumstances,

Bought a full race system!

Posted: **Wed Jan 11, 2006 1:18 pm**

If i had the money i would

Theres a guy about 10 miles from where i live that will make me a new can, but if i cant get this fecker off there aint no point

Posted: **Wed Jan 11, 2006 6:25 pm**

There is a point, just undo it at the headers, it means the whole thing will come off .

Posted: **Wed Jan 11, 2006 8:56 pm**

Wont that mean replacing the exhaust gasket?

Posted: **Wed Jan 11, 2006 10:32 pm**

Might have to do that, but they arent that expensive as far as i know. If you cant get the can off you got no choice anyway but to replace the whole thing. Depends how bothered you are i guess, but have a go at removing that cover, strange how its such a pig to get off, thats the first ZXR ive seen with one tho.

Posted: **Thu Jan 12, 2006 3:33 pm**

On mine there were 2 torx bits holding the cover on with the bolts under the cover.

If not...

Posted: **Thu Jan 12, 2006 8:29 pm**

lmao!
Looks like its pop rivvets holdin the cover on
Gonna have a go at drillin them out at the weekend
Cans gonna have to be put on hold me thinks, g/f wants to go away for valantines day and i want bike serviced aswell.........if only money grew on trees or some other plantlife

Posted: **Sun Jan 15, 2006 3:39 pm**

Managed to get it off today, just drilled the pop rivets out, took the little shield off and removed the 3 bolts that were holdin the can on.
I sound SO much better wiv the can off

If only i had a race can to go on it!!!
Cheers
Ian

www.zxrworld.co.uk

Removing standard can

Removing standard can