www.zxrworld.co.uk

Posted: **Sun Oct 22, 2006 5:19 pm**

Ok, the problem is, everything works fine untill you put main beam on or flash, the high beam stays on untill you switch off the ignition!

I have taken the dimmer/ pass switch apart and cleaned all the terminals etc, and i have swapped the relay and it hasnt cured it! you can hear the relay click on but not off?

Please help!

Posted: **Sun Oct 22, 2006 5:38 pm**

check your earths and battery mate believe me!

Posted: **Sun Oct 22, 2006 5:40 pm**

Sounds like a short or break in the wire that sends the signal back to the relay. Check the loom where it meets metal for wear. If you can identify the wire that returns the signal to the relay, then trace that wire looking for same.

Posted: **Sun Oct 22, 2006 7:50 pm**

Welcome to the best forum for the ZXR

http://www.sloweracing.co.uk
Powered by
http://www.zxrworld.co.uk

Posted: **Mon Oct 23, 2006 12:57 pm**

wahay! sorted it, took the relay off, gave it a clonk, put it back and it all works!

Posted: **Mon Oct 23, 2006 8:34 pm**

Job done

Posted: **Tue Oct 24, 2006 2:47 am**

Yeah, that was my next bit of advice...smack it with a hammer.

www.zxrworld.co.uk

Need help- Headlight problem!

Need help- Headlight problem!