Page 1 of 1
sp wiring loom
Posted: Wed May 11, 2011 7:42 am
by mitchpaul
trying to make race loom for a 96 400sp ,i copied the 91 sp loom of this site but no spark, it use to run well, i put diode on the grey wire ,i need to no colours and plug numbering system,the 91sp loom says to earth one of the pulsar wires this seems wrong to me ? maybe my prob
Re: sp wiring loom
Posted: Wed May 18, 2011 7:19 am
by Mori Man
If you were starting from a SP loom it should just be a case of snipping out the road electrics and bypassing the side stand signal - thats what your fauly might be!
If it thinks the side stand is down it wont spark , have you tried holding the clutch in? Have you bypassed this circuit too ?
MM!