Page 1 of 1
cbr600rr 03 nissins vs k1-2-3 600 tokiko's
Posted: Mon Apr 09, 2012 9:38 am
by zxr400l3
Whats the difference? I can have the 600rr for free, and i can buy the suzuki 4 or 6 pots for cheap, so its not about the money ... please give some advice
Re: cbr600rr 03 nissins vs k1-2-3 600 tokiko's
Posted: Mon Apr 09, 2012 10:04 am
by CaNsA
Well 6pots are going to stop you better.....
I have a pair of 99 blade 4pots to fit, cant wait
brades rated for a 900cc bike going on a 400cc bike..... i think i might just be able to stop next time i run out of talent mid corner
Re: cbr600rr 03 nissins vs k1-2-3 600 tokiko's
Posted: Tue Apr 10, 2012 9:18 pm
by thomp1983
the 6 pots can apparently be a bugger to bleed and get decent feel from, i have the nissin's on mine, from a vtr not cbr but the same caliper they are well worth having the only decision you need to make is weather to use spacers for fitting or have the caliper mounts redrilled i had mine redrilled cost £20 which is the same as the spacers on ebay and a better solution on my eyes. if you can get the cbr calipers for free get them you'll be more than pleased with them
chris
Re: cbr600rr 03 nissins vs k1-2-3 600 tokiko's
Posted: Tue Apr 10, 2012 10:05 pm
by CaNsA
What are the pros and cons of using sleeves/spacer as opposed to getting the mounts re-drilled?
Re: cbr600rr 03 nissins vs k1-2-3 600 tokiko's
Posted: Wed Apr 11, 2012 9:01 pm
by thomp1983
it's to do with which bolts you use to mount the calipers, i can't remember exactly but you'll find the answer if you search but i think if you use the spacers you end up using a smaller bolt to mount the calipers whereas redrilling the holes allows you to use the original bolts, it's been awhile since i fitted mine
chris