www.zxrworld.co.uk

How do you adjust the clutch cable slack at the engine end (not lever end) as mine is really bad. Put it in gear with the clutch in and the bike bounces a bit like its trying to bite.

Thanks

At the bottom cable passes through the arm it pulls, there is a nut either side of the arm. You can move the cable through by tighten up.

Thanks, all done now

is clutch wear quite common? My zxr has 16k on the clock I`d i`ve run out of adjustment at the top end already.

is the clutch slipping?

New clutch cable? my zxr400 done sod all miles but iv put a new clutch cable on. about 15,000kms i think shes on

i remember putting a new cable on my zxr400 and it was longer than the cable i took off, in the end changed the clutch plates.

I have a brand new clutch cable and it too seems too long. The cable is fully adjusted at both ends???

Is changing the clutch plates neccessary, and is it hard to do?
I have a spare engine to take bits off if need be.

Jason

mate changing clutch plates piss easy job

see my two post took me about 30 mins and i never done it myself thanx to the help from guys on here and the manuals here

http://www.zxrworld.co.uk/zxr400/manual.html

look at the H model for the write up