www.zxrworld.co.uk

Hi All,
With the help of Ross46 I finally got these done.
http://litetek.co/Carb_Kit_Kawasaki_ZXR400.html
cheers
Blair

my pleasure, i'll be fitting these to my spare set of carbs so i'll put on here how it goes, by the looks of it these include all the seals that are required to split the carbs? and what does 1300 tbh convert to?

Yes the fuel hose, breather o-rings, and choke plunger dust caps are also included.

Diagram shows these for the H, I assume all seals on the L9 are the same, float bowl O ring most importantly, cheers.

Matching Kawasaki part numbers are shown on the web page. To the best of my knowledge the parts are the same between models.
cheers
Blair

Cheers Blair, busy stripping bike and was being lazy, too busy to check, just hoped someone would know, will confirm and get an order in.

These are massively high quality, I thought my carbs were fine, put the seals in and im now busy perfecting them, must have been leaking internally and I didn't even know! Worth every penny

They definitely fit an L then? Checked Cradleys and part nos for the H and L are the same, just thought the H carbs were a different size, could be that i,m being a plonker though Carbs come off today, judging by the mess between the airbox they will need this kit badly.

Fit the L perfectly, only advice I would give is maybe smear a little silicone in the float bowl grooves to hold the seals in place

ross46 wrote:Fit the L perfectly, only advice I would give is maybe smear a little silicone in the float bowl grooves to hold the seals in place

Cheers mate, stripped mine today, they were shot, will be ordering tke kit later.

Hi all, I just stripped my carbs and got them ultrasonicly cleaned, they're mint but I need new seals as the old ones are fubar'd. How long do these kits take to arrive in the UK normally? Cheers.

Hi Jack,
About 10 days to the UK.
cheers
Blair

Awsome, thank you very much.

AHHHH MAN i forgot to redo the pictures with your seals :/ would you like me to do a post on how to fit all of your seals with pictures and instructions then you can direct people to that post?

Only if you want to!