Carb seals
Posted: Sun Jan 31, 2021 10:14 am
I found that my fuel tap wasn't shutting off a while ago when I got covered in fuel removing it! So I replace the service kit. I replaced my oil and there was a strong smell of petrol and it looked like the level has risen. I suspect he carbs have been letting fuel through as I had turned my fuel tap to off but obviously it wasn't off. I have checked the condition off the float needles and seats and they look ok. I just wanted to confirm that if it is the seals in the carbs worn then it is the ones that sit under/around the brass piece that the float needle drops into that I will need?
Thank You
Terence
Thank You
Terence