www.zxrworld.co.uk

Hi been looking for a right hand clipon and bar for a zxr400 l with not much luck loads of left hand on ebay
any body know if the left bar is compatibale with the right clip on ? with me just putting a locating pin for the throttle assembley?
cheers lee

No chance mate.

but a simple ebay search of zxr400 bar returned this
http://cgi.ebay.co.uk/94-KAWASAKI-ZXR-4 ... 3cb620f7c5



or you could be really cool and get these, really really sexy. I think i might get a set soon

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

I saw that one on the bay but it looks bent sent the seller a message.
Those clip ons look sweet do you know what size the 400l forks dia?

Take a dressmaking tape measure (ask your mum / missus) and measure round the fork below the clip-on. Failing that use a bit of string and then measure it with a ruler. That's your circumference. You can work out the diameter from that with the maths you learned at school or Google for the formula if you never paid attention in class. I can't remember it offhand.

Ebay ain't the only place for spares. Try some breakers. Baz has a big list on here somewhere of breakers' phone numbers. There'll be loads out there. Most breakers can't be arsed to list everying on Ebay. Just ring 'em.

Yeah thanks for that. Ebay has not been to good at the moment for parts.
I bought a right hand bar but it was scrap been helicoiled in the end and was about a inch to short
Am thinking about buying some new clipons now at least there be in good condition, but i will try the local breaker yards tommorrow.

Try these guys http://www.ams-motorsport.co.uk/ . They specialise in ZXR400 breaking. Used to be a forum sponsor a few years ago.

Tried the local breakers for some clip ons but no luck there so i treated my self to some renthal clip ons and grips also found out the clip on size is 50mm fitted a treat just drilled the bars for the locating pins for the swich gear and the throttle
really like the quality of the renthal gear as i run it on my downhill mtb

I imagine that the shortage of right bars is because most uk tracks (and all roundabouts) are clockwise, hence lots of right handers, so I imagine lots of right side scrapes etc.

another option is SES racing in norfolk, they do quite a few ally bits for the zxr (front subframes and screen brace) and rear sets & clip ons. They do some nice steel tube clip ons for about £40 the pair, ally £50. Cheap and chearful, but on the upside they're cheap and cheerful! Seem to work fine on my gpz. they of course do posh ally ones too.

http://www.sesraceproducts.com/