Need to Extend HT Leads for Ramair

[shaggy69]

I need to re-locate my coils due to fitting ramair, where is best to put them?. Also, Anyone know if u just use normal HT Leads that u can buy from car auto shops in 1m lengths or does the wee ZXR need something diferent. Cheers Derek 07825 908653

[Tirpitz]

I replaced all my HT leads with standard copper cored stuff from the bike spares shop and it runs a treat, so deffo no special lead required.

[cargo]

yeah I did this with mine just bought the regular copper core stuff from a auto factor.....works a treat.

Mine are mounted onto the front of the fairing/clocks bracket side by side I just used cable ties to hold em

[AFM327]

I've got mine under the clocks like Cargo.

[gavinfdavies]

would stick coils fit? I've converted my gpz to run on zx6r stick coils, works a treat. the only tricky part is kawasaki's odd water proof connectors, so buy the little sub-loom to go with them, then solder it up directly to the low tension inputs for the coils. saves alot of space, and gives good spark, but the sticks are a little taller than normal caps, maybe 1.5 inch out the top of the head?

[mick41zxr]

Stick coils work a treat, I used ZX9C coils they would be lucky to be 1/4 inch longer. Leaves plenty of room for a kit type airbox.

[mark400]

If you fit ramair, you can bolt them onto the top of the airbox at the front under the panel that the airhoses go into. Stick coils are also a cool option, I fitted some CBR600RR coils which worked straight away thanks to an excellent wiring guide elsewhere in this forum
The CBR coils don't stick out at all - Perfect fit !

[mistigri]

Hi! Mys are located in the front like this: