Okay so the story goes I got my zxr400 in bits, started rebuilding and was unhappy, stripped it entirely and rebuilt it from stratch. I'm yet to post a build thread but this is what happened when you fit a bearing (supplied in the box by the last owner)
![Image](http://i1187.photobucket.com/albums/z397/shredtheibanez/photo-3.jpg)
![Image](http://i1187.photobucket.com/albums/z397/shredtheibanez/photo-1.jpg)
Luckily I had it on paddock and was running through the gears (after a gearbox strip) and heard this horrendous bang. No
Idea why it collapsed, all torqued to 110 with spacers in.. The only thing I could think is that the spacers were used to protect the inner 'bore' of the caliper carrier so got powdercoated on the running edge. Since I have removed all powdercoating from the spacers :/
Thought I'd share
![Smile :)](./images/smilies/icon_smile.gif)
Ryan