ZXR400 h1 exhaust headers???

Welcome to the ZXRworld forum.

Moderator: Moderators

Post Reply
Jazzxr
Posts: 4
Joined: Wed May 03, 2017 9:11 am
My Bike: ZXR400 H1

ZXR400 h1 exhaust headers???

Post by Jazzxr »

Hi can anyone point me in the right direction for some new stainless headers for my h1 please,does anyone still make/sell them?
Any help greatly appreciated
Thanks
User avatar
banner001
Track day God
Track day God
Posts: 2585
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: ZXR400 h1 exhaust headers???

Post by banner001 »

SBS are out of business and I do t think delkevic or black widdow make them anymore, so it's ebay and Internet hunting, or find a local exhaust maker/welder, gonna cost you similar money
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
Jazzxr
Posts: 4
Joined: Wed May 03, 2017 9:11 am
My Bike: ZXR400 H1

Re: ZXR400 h1 exhaust headers???

Post by Jazzxr »

Thanks for the reply,been looking for months with no luck.
Can’t even find a used set unfortunately.
User avatar
banner001
Track day God
Track day God
Posts: 2585
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: ZXR400 h1 exhaust headers???

Post by banner001 »

Remember, the only bits you can see is the link pipe

From ebay:
274081402091 might clean up and are genuine H pipes
143222584231 look like Micron pipes
192823975590 a bit overpriced when vat and import taken into account, but are brand new, say they are H pipes, but dont have the ballencer loops from the H
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
User avatar
banner001
Track day God
Track day God
Posts: 2585
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: ZXR400 h1 exhaust headers???

Post by banner001 »

Not H1, but these are the same sandy bike spares ones as i have fitted to my bike, needs a 52mm slip on can, and possible a bit of modification to the link pipe and or your lower RHS fairings. but ive had no issues with mine, full stainless steel too so will last very long
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
Post Reply