fresh rebuild and dyno run ...
Moderator: Moderators
-
- Posts: 6
- Joined: Wed Jan 14, 2015 6:06 pm
- My Bike: zxr 400l race bike
fresh rebuild and dyno run ...
Happy with 67rwhp considering
no major engine work !You do not have the required permissions to view the files attached to this post.
-
- zxr400 oc member
- Posts: 128
- Joined: Sat Aug 30, 2014 12:03 am
- My Bike: KR-1R
- Location: NE Derbyshire
Re: fresh rebuild and dyno run ...
You will probably get the ..All dyno are different brigade doubting your figures..
I thinks it's a great result and if it was my bike I would be very happy![Smile :)](./images/smilies/icon_smile.gif)
Did you do much to it? Or totally stock..
All simple (no cost, haha) tips to gain more hp gratefully received.
I thinks it's a great result and if it was my bike I would be very happy
![Smile :)](./images/smilies/icon_smile.gif)
Did you do much to it? Or totally stock..
All simple (no cost, haha) tips to gain more hp gratefully received.
We are we're we are..
-
- Posts: 6
- Joined: Wed Jan 14, 2015 6:06 pm
- My Bike: zxr 400l race bike
Re: fresh rebuild and dyno run ...
I did say no major mods !
It is a race bike and the engine was built by dynotech with slightly higher compression and a clean-up of ports etc. There is an old Ray Stringer ramair fitted (which works well ..), carbs with R1 needles, scorpion race system, stick-coil conversion and translogic quickshifter. The main gain is a good dyno set-up and I used Rob at RJS Superbikes next to Mallory Park and he's really good which is evident by the number of race team bikes in his workshop awaiting race set-ups ...
![:smt002](./images/smilies/002.gif)
-
- Posts: 6
- Joined: Wed Jan 14, 2015 6:06 pm
- My Bike: zxr 400l race bike
Re: fresh rebuild and dyno run ...
meant to say, last years engine with the same spec but without ramair was making 65rwhp on dynotech's dyno so I know this is a genuine result but then again I'm not that bothered with outright power just good useable power and drive ....