Right guys. Back to G model. Running the 32 carbs for the sake of being clear. Been struggling like hell to get her to run properly and finally I can say I am very very close. Just one thing that I need help with. Every time I take her for a test ride she goes ok (ish) but when I get back home the bike straight forward refuse to idle, then floods. Running the screws (dunno if its fuel screws or air screws, jury is still out on that I think) at 2 turns. Standard air filter but with a full BEET system of a ZXR400. Can someone please advise on how to get the bike to idle after a ride. Thanks.
P.S. It does the same from 3 turns all the way down to 1.5 turns
ANOTHER fueling question
Moderator: Moderators
-
- Posts: 90
- Joined: Mon Jan 21, 2013 1:20 pm
- My Bike: Kawasaki ZX400G
- Location: South Africa
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: ANOTHER fueling question
Have you upped the idle speed?
As far as i know, the idle speed should be set when the bike is warmed up.
Stop fucking with the air/fuel mix and ride the bike until warm, increase the idle speed until bike idles.
As far as i know, the idle speed should be set when the bike is warmed up.
Stop fucking with the air/fuel mix and ride the bike until warm, increase the idle speed until bike idles.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 90
- Joined: Mon Jan 21, 2013 1:20 pm
- My Bike: Kawasaki ZX400G
- Location: South Africa
Re: ANOTHER fueling question
Been there. Would get her nice and warm and while keeping her going with the throttle I'd adjust the idle screw. Still no joy. Its either idling at 3-4k or dead.