My 1989 ZXR400 H2 track bike project
Moderator: Moderators
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: My 1989 ZXR400 H2 track bike project
Fried rectifier/regulator for breakfast ?
-
- Posts: 122
- Joined: Wed Feb 27, 2013 2:35 pm
- My Bike: ZXR400 H2
Re: My 1990 ZXR400 H2 track bike project
cargo wrote:Fried rectifier/regulator for breakfast ?
????? Do you mean where it is mounted?
Going to have a small computer fan on top, that way no problem with cooling.
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: My 1989 ZXR400 H2 track bike project
Good response.
But think of the extra weight with all that free cold fresh air rushing past.
But think of the extra weight with all that free cold fresh air rushing past.
-
- Posts: 122
- Joined: Wed Feb 27, 2013 2:35 pm
- My Bike: ZXR400 H2
Re: My 1990 ZXR400 H2 track bike project
Rear caliper powder coated, all new seals and pads.
You do not have the required permissions to view the files attached to this post.
Last edited by p.lally on Sun Jul 13, 2014 6:48 am, edited 2 times in total.
-
- Posts: 122
- Joined: Wed Feb 27, 2013 2:35 pm
- My Bike: ZXR400 H2
Re: My 1990 ZXR400 H2 track bike project
Fitted
You do not have the required permissions to view the files attached to this post.
Last edited by p.lally on Sun Jul 13, 2014 6:48 am, edited 1 time in total.
-
- Posts: 122
- Joined: Wed Feb 27, 2013 2:35 pm
- My Bike: ZXR400 H2
Re: My 1990 ZXR400 H2 track bike project
New rear sprocket 47T
You do not have the required permissions to view the files attached to this post.
-
- Posts: 122
- Joined: Wed Feb 27, 2013 2:35 pm
- My Bike: ZXR400 H2
Re: My 1990 ZXR400 H2 track bike project
Hi guys, it’s been along time !!!!
6 years, 2 moves and 2 kids later I finally getting round to do some work on my project.
Sorry it’s been so long I’ve had a lot on!
Today I stripped the front end down as the forks had pitted and were leaking.
I will be sending them off for new stanchions fitting.
6 years, 2 moves and 2 kids later I finally getting round to do some work on my project.
Sorry it’s been so long I’ve had a lot on!
Today I stripped the front end down as the forks had pitted and were leaking.
I will be sending them off for new stanchions fitting.
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: My 1989 ZXR400 H2 track bike project
![excited :excited](./images/smilies/happy.gif)
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said![:smt003](./images/smilies/003.gif)
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
![:smt003](./images/smilies/003.gif)
-
- zxr400 oc member
- Posts: 148
- Joined: Mon Jan 12, 2009 12:04 pm
- My Bike: ZXR400L5
- Location: Newport Shropshire
Re: My 1989 ZXR400 H2 track bike project
In case it is worth consideration, A M Philpot (hard chrome ltd) will grind out the defects, hard chrome oversize, and then grind back to size. I have used them several times and the service and quality are good. If you strip out the forks to just the stanchion and the lower leg, they will organise collection, repair and delivery for £270. That is helpful because they will separate the stanchion from the lower leg, and refit it with loctite 363, which will hold the two parts together securely and prevent oil leaks. Phone number01582 571234 or andy@amphardchrome.co.uk
-
- Posts: 14
- Joined: Wed Jan 13, 2021 6:43 am
- My Bike: 2000 Kawasaki ZRX
- Location: Texas
Re: My 1989 ZXR400 H2 track bike project
Does anyone know what happened with this build? Did he manage to finish it?