I saw a TL1000R yesterday with Gilles Rearsets on it and it looked as if they would fit the 400.
I took the measurements center to center but the 400 is 5cm and the TL is 4,5cm.
This had me thinking there has to be another bike with 5cm gap.
Any ideas?
Thread title edited by CaNsA.
Reason:- The retardation was winding me up.
Do rearsets from another bike fit the 400?
Moderator: Moderators
- Mavve750
- Posts: 61
- Joined: Fri Jul 18, 2008 3:11 pm
- My Bike: 5 ninjas and one R1.
- Location: Sweden
-
- Posts: 138
- Joined: Sun Apr 17, 2011 11:23 am
- My Bike: Zxr400L8
- Location: gloucestershire
Re: Does rearsets from another bike fit the 400?
I bought some rear sets from GB moto for the zxr 400 just needed to fit a hydraulic brake light pressure switch they were £186 the quality is good for the price.
I think the kr1 had the same hole pattern as the zxr?
I think the kr1 had the same hole pattern as the zxr?
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Does rearsets from another bike fit the 400?
I believe the early r6's might fit. Friend of mine had some gilles fitted to his zxr and previous owner said they were off an r6.
- Mavve750
- Posts: 61
- Joined: Fri Jul 18, 2008 3:11 pm
- My Bike: 5 ninjas and one R1.
- Location: Sweden
Re: Does rearsets from another bike fit the 400?
Great. Thanks. I'll try that.RedexRobB wrote:I believe the early r6's might fit. Friend of mine had some gilles fitted to his zxr and previous owner said they were off an r6.
I'm only looking for Gilles gold rearsets. My ZXR750R have them on and I'm trying to make them look identical.
![Smile :)](./images/smilies/icon_smile.gif)
![Image](http://i.imgur.com/JMcrfzx.jpg)
- Mavve750
- Posts: 61
- Joined: Fri Jul 18, 2008 3:11 pm
- My Bike: 5 ninjas and one R1.
- Location: Sweden
Re: Does rearsets from another bike fit the 400?
Could it be these?
![Image](http://i.imgur.com/OVEDZkM.jpg)
Somehow I need to be sure. They are a bit expensive and I can't turn them back once I buy them.
Thanks.
![Image](http://i.imgur.com/OVEDZkM.jpg)
Somehow I need to be sure. They are a bit expensive and I can't turn them back once I buy them.
Thanks.
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Do rearsets from another bike fit the 400?
My advice would be to measure them up.
- Mavve750
- Posts: 61
- Joined: Fri Jul 18, 2008 3:11 pm
- My Bike: 5 ninjas and one R1.
- Location: Sweden
Re: Do rearsets from another bike fit the 400?
They didn't fit.
The center to center is 50mm and the closest I've found is in a Honda CBR1000RR which have 56mm.
This was difficult to find.....
I thought people had done this before.
The information should be on this site![:smt006](./images/smilies/006.gif)
The center to center is 50mm and the closest I've found is in a Honda CBR1000RR which have 56mm.
This was difficult to find.....
I thought people had done this before.
The information should be on this site
![:smt006](./images/smilies/006.gif)
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: Do rearsets from another bike fit the 400?
Oh I really do apologise you are so right. It is
that the dimensions of the footrest mountings for the ZXR400 have been omitted from the forum.
It's utterly disgusting and I humbly and sincerely apologise.
Then again................It could be argued that your one of many on this forum who expects everything to be done for them and have everything handed to them on a plate.
Now go buy a vernier
:wanker
![shocking shocking](./images/smilies/icon_e_surprised.gif)
It's utterly disgusting and I humbly and sincerely apologise.
Then again................It could be argued that your one of many on this forum who expects everything to be done for them and have everything handed to them on a plate.
Now go buy a vernier
:wanker
- Mavve750
- Posts: 61
- Joined: Fri Jul 18, 2008 3:11 pm
- My Bike: 5 ninjas and one R1.
- Location: Sweden
Re: Do rearsets from another bike fit the 400?
Or - we could solve this together and get us some nice rear sets.
I just figured that the ZXR400 is ancient now and someone maybe did it before.
I just figured that the ZXR400 is ancient now and someone maybe did it before.
- Mavve750
- Posts: 61
- Joined: Fri Jul 18, 2008 3:11 pm
- My Bike: 5 ninjas and one R1.
- Location: Sweden
Re: Do rearsets from another bike fit the 400?
Cargo can't read PM's apparently.
"You missed the entire meaning of the post.
I've found lots of rear sets for the bike, but the question is if rear sets from other bikes will fit the 400."
If you don't know then don't bother -
Or....
We could find out together.
"You missed the entire meaning of the post.
I've found lots of rear sets for the bike, but the question is if rear sets from other bikes will fit the 400."
If you don't know then don't bother -
Or....
We could find out together.