Leey wrote:Interestingly I did mention the lock stops in my early post but it looks like nobody noticed that either
MOT fail. HELP
Moderator: Moderators
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: MOT fail. HELP
- KwakKwak
- zxr400 oc member
- Posts: 462
- Joined: Sun Jun 16, 2013 11:10 pm
- My Bike: ZXR 400L9 2001
- Location: Carrickfergus, Northern Ireland.
Re: MOT fail. HELP
Is the correct answer.CaNsA wrote: The MOT guy is a tit.
Does the low seat height reflect the low intelligence? Easier to get an asshole onto.
-
- Posts: 28
- Joined: Thu Dec 12, 2013 8:20 am
- My Bike: L1 ZXR400
Re: MOT fail. HELP
Nothing a cable tie around the lock stop won't sort, surely...
Posted on Pistonheads too and everyone agrees the MOT guy is a tit.
Posted on Pistonheads too and everyone agrees the MOT guy is a tit.
-
- Posts: 28
- Joined: Thu Dec 12, 2013 8:20 am
- My Bike: L1 ZXR400
Re: MOT fail. HELP
All sorted. Lockstops are fully intact. put a small piece of epoxy resin on one side. Passed with flying colors.
23 years old and she is still perfect
23 years old and she is still perfect
-
- zxr400 oc member
- Posts: 148
- Joined: Mon Jan 12, 2009 12:04 pm
- My Bike: ZXR400L5
- Location: Newport Shropshire
Re: MOT fail. HELP
Have a look at a post under "free for all" page 5, titled "zxr400 tight on full lock" by rich262 dated Sun Jan 06 2013.
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: MOT fail. HELP
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::