What Torque should the downpipes be where they connect on with two nuts per pipe on the cyclinder?
Cannot find the value in the manual!
Mine are finger tight, and the steel guides are all showing about 5mm on all the downpipes!
URGENT- Torque for downpipes
Moderator: Moderators
-
- Posts: 197
- Joined: Fri Jan 25, 2013 12:33 pm
- My Bike: CBR600RR, ZXR400 L-2
- Location: Waterlooville, Hampshire
- banner001
- Track day God
- Posts: 2591
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: URGENT- Torque for downpipes
hmm its not is it.
the fzr 1000 is 12Nm...that will be fine, use lots of copper grease on the threads if you want to be able to get them off again in another 20 years
the fzr 1000 is 12Nm...that will be fine, use lots of copper grease on the threads if you want to be able to get them off again in another 20 years
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: URGENT- Torque for downpipes
Dear me........................did you both not actually check the manual ???
I found very clear information regarding torque settings...........................top of page 1-9 in the H manual or top of page 1-11 in the L supplement
I found very clear information regarding torque settings...........................top of page 1-9 in the H manual or top of page 1-11 in the L supplement
- KwakKwak
- zxr400 oc member
- Posts: 462
- Joined: Sun Jun 16, 2013 11:10 pm
- My Bike: ZXR 400L9 2001
- Location: Carrickfergus, Northern Ireland.
Re: URGENT- Torque for downpipes
Fook off cargo, I was about to be teachers pet and get this one, outlet pipe mounting bolt 4.9N/m?????????
Torque setting is for an L, do not use it for the H, setting is completely different.
Torque setting is for an L, do not use it for the H, setting is completely different.
Does the low seat height reflect the low intelligence? Easier to get an asshole onto.