Hi guys.
I have the standard downpipes, and end can.
I want to get some more noise from this bike, does the PipewerX end can fit original pipes ?
If not, does anyone know about slip on cans for the original pipes ?
Change end can ?
Moderator: Moderators
-
- Posts: 51
- Joined: Fri Oct 19, 2012 4:05 am
- My Bike: Kawasaki ZX4R 1991 (L)
- Location: Bergen, Norway
- Contact:
Change end can ?
* Aprilia RS 125 (2000 modell / 2 Stroke)
* Kawasaki ZXR 400 (1991 / 4 Stroke)
* Kawasaki ZXR 400 (1991 / 4 Stroke)
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Change end can ?
The original pipes aren't slip on.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 51
- Joined: Fri Oct 19, 2012 4:05 am
- My Bike: Kawasaki ZX4R 1991 (L)
- Location: Bergen, Norway
- Contact:
Re: Change end can ?
Is one of these recommended then ?
http://viewitem.eim.ebay.no/Kawasaki-ZX ... 90498/item
http://viewitem.eim.ebay.no/ZXR400-ZXR- ... 16965/item
Maybe this one ?
http://viewitem.eim.ebay.no/Kawasaki-ZX ... 13650/item
EDIT:
I read a little bit about it, and it seems to me that " Micron " system is the best downpipes ?
Do you know where i could get one ?
Thanks so much for replying
* Aprilia RS 125 (2000 modell / 2 Stroke)
* Kawasaki ZXR 400 (1991 / 4 Stroke)
* Kawasaki ZXR 400 (1991 / 4 Stroke)
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Change end can ?
your second link (http://viewitem.eim.ebay.no/ZXR400-ZXR- ... 16965/item) will allow you to use 3-bolt bolt-on cans, or 52mm slipons, the delkavic exhausts are replicas of the originals and wont allow you to use anything other than a 3-bolt exhaust (with the same bolt-spacing as the original can).
micron are a ~60+mm outlet and are generally seen as a "race" exhaust, if you can get one, congratulations, they are getting rarer
micron are a ~60+mm outlet and are generally seen as a "race" exhaust, if you can get one, congratulations, they are getting rarer
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 51
- Joined: Fri Oct 19, 2012 4:05 am
- My Bike: Kawasaki ZX4R 1991 (L)
- Location: Bergen, Norway
- Contact:
Re: Change end can ?
I think i will go for the SandySpare pipes.
Do some of you guys know if PipewerX cans will fit these pipes?
If not maybe another silencer ?
Do some of you guys know if PipewerX cans will fit these pipes?
If not maybe another silencer ?
* Aprilia RS 125 (2000 modell / 2 Stroke)
* Kawasaki ZXR 400 (1991 / 4 Stroke)
* Kawasaki ZXR 400 (1991 / 4 Stroke)
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Change end can ?
best bet is email pipewerx, i think its a 3-bolt fitting, but if not, just ask them what diameter slip-on it will fit.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Restricted
- Posts: 825
- Joined: Fri Aug 26, 2011 9:31 pm
- My Bike: zxr 400 l6
Re: Change end can ?
yeah the pipewerx can do fit the original downpipes, i had a chat with one of the guys at nec