Broken Speedo

Welcome to the ZXRworld forum.

Moderator: Moderators

Post Reply
Mikey427
Posts: 21
Joined: Sat Mar 23, 2013 12:01 am
My Bike: zxr 400

Broken Speedo

Post by Mikey427 »

Hi,
to my great annoyance, I just discovered that my speedo stopped working. From my experience with other bikes i would assume its just the cable that either slid out, snaped or got traped somehow. Before i start playing around with it, I wanted to ask if there are any specific speedo problems on zxr to be aware of.
Thanks for any info.
User avatar
CaNsA
zxr400 oc member
zxr400 oc member
Posts: 1742
Joined: Sat Nov 29, 2008 4:02 pm
My Bike: ZX6R F1
Location: Liverpool

Re: Broken Speedo

Post by CaNsA »

Nopes, remove the cable, you will know if its buggered or not.

If the cable is fine then the speedo drive is more likely to be the issue.
User avatar
banner001
Track day God
Track day God
Posts: 2596
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: Broken Speedo

Post by banner001 »

mine broke on moday, and ive just fitted a £7 pattern replacement from ebay (better than the £21 original from cradleys).

disconnect the speedo cable from the speedometer and see if the square cable turns when you push the bike forwards a few meters, if not you have a break from wheel to cable, if it turns you have a problem in the speedometer.

fyi, mine broke 2" from where the cable slots into the bottom of the wheel, must have just been under too much long-term abuse :D
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
Post Reply