My 1989 ZXR4O0 H1
Moderator: Moderators
-
Chadatious
- Posts: 113
- Joined: Fri Jun 18, 2010 9:28 am
- My Bike: ZXR 400 H1
- Location: Kent
My 1989 ZXR4O0 H1
hey all ive just got a 1989 zxr400 in A1 condition not a mark on it. only bits missing in the pics are a black screen i need to get, and im waiting for my new air intake hoses.
You do not have the required permissions to view the files attached to this post.
-
RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
-
Chadatious
- Posts: 113
- Joined: Fri Jun 18, 2010 9:28 am
- My Bike: ZXR 400 H1
- Location: Kent
Re: My 1989 ZXR4O0 H1
Thanx 
its in pieces now lol, had a misfire but the o rings to the airbox/carbs were knackard, and a slight oil leak on engine head from a o ring but all parts on order now so fingers crossed that all the problems were, and i would have got myself a good buy lol
its in pieces now lol, had a misfire but the o rings to the airbox/carbs were knackard, and a slight oil leak on engine head from a o ring but all parts on order now so fingers crossed that all the problems were, and i would have got myself a good buy lol-
davkay70
- Posts: 10
- Joined: Thu Jul 23, 2009 9:30 pm
- My Bike: ZXR400 {1990}
-
Chadatious
- Posts: 113
- Joined: Fri Jun 18, 2010 9:28 am
- My Bike: ZXR 400 H1
- Location: Kent
Re: My 1989 ZXR4O0 H1
Thanx, and yeh hope so its ticking over properly now and not staying at high revvs for a while before droping. but runs abit lumpy but probably needs a good run lol. but i replaced the carb/airbox rubbers, and tightend carb inlet claps which were loose
-
Chadatious
- Posts: 113
- Joined: Fri Jun 18, 2010 9:28 am
- My Bike: ZXR 400 H1
- Location: Kent
Re: My 1989 ZXR4O0 H1
Thanx, and yeh hope so its ticking over properly now and not staying at high revvs for a while before droping. but runs abit lumpy but probably needs a good run lol. but i replaced the carb/airbox rubbers, and tightend carb inlet claps which were loose