Parts from other bikes which fit the ZXR
Moderator: Moderators
-
- Posts: 1
- Joined: Mon Jan 31, 2011 9:17 pm
- My Bike: BMW R1200 GS
Re: Parts from other bikes which fit the ZXR
This may turn your stomachs people but I want a front and rear end for my... Yam 350 powervalve.
H model yokes and forks fit straight on, but are they the same size yokes as the L models?
Same with the swingarm, the H fits with minimal adjustment (to the Yam frame) but is the L swingarm the same width as the H model?
If any of you lot are breaking a bike and can offer the parts I need I can come and collect as long as your not too far away.(I'm in the north west around Leyland M6 J28)
H model yokes and forks fit straight on, but are they the same size yokes as the L models?
Same with the swingarm, the H fits with minimal adjustment (to the Yam frame) but is the L swingarm the same width as the H model?
If any of you lot are breaking a bike and can offer the parts I need I can come and collect as long as your not too far away.(I'm in the north west around Leyland M6 J28)
- Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: Parts from other bikes which fit the ZXR
Good way to introduce yourself to the forum
L yokes have bigger centre pin and also they are 1mm larger on bottom clamp - not sure if top bridge is same or not. L yokes allow modern USDs like off the ZX636 , ZX10-R to be used and get radial brakes, no speedo drive though unless you use standard wheel and get spcers made up.
H1 / H2 Swingers are different looking to each other , H1 has upper subframe and H2 looks like the L model arm but both are same dimesions. L model arm uses a larger axle pin and has a double bearing set up one end and pretty sure its a tad wider too mounting into the frame.
Good luck on your hunt,
MM!
BTW, should your project get off the ground your welcome to post pics of build in the other bikes section
L yokes have bigger centre pin and also they are 1mm larger on bottom clamp - not sure if top bridge is same or not. L yokes allow modern USDs like off the ZX636 , ZX10-R to be used and get radial brakes, no speedo drive though unless you use standard wheel and get spcers made up.
H1 / H2 Swingers are different looking to each other , H1 has upper subframe and H2 looks like the L model arm but both are same dimesions. L model arm uses a larger axle pin and has a double bearing set up one end and pretty sure its a tad wider too mounting into the frame.
Good luck on your hunt,
MM!
BTW, should your project get off the ground your welcome to post pics of build in the other bikes section
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
-
- Posts: 60
- Joined: Thu Mar 01, 2012 9:49 pm
- My Bike: ZXR 400 L4
- Location: Basingstoke, Hampshire.
Re: Parts from other bikes which fit the ZXR
Any other rear brake levers that would fit our bike?
I broke mine
Any universal ones perhaps?
A second hand one on eBay is looking to be £30 odd...
I broke mine
Any universal ones perhaps?
A second hand one on eBay is looking to be £30 odd...
-
- Posts: 60
- Joined: Thu Mar 01, 2012 9:49 pm
- My Bike: ZXR 400 L4
- Location: Basingstoke, Hampshire.
Re: Parts from other bikes which fit the ZXR
Or some cheap rearsets?
-
- Posts: 60
- Joined: Thu Mar 01, 2012 9:49 pm
- My Bike: ZXR 400 L4
- Location: Basingstoke, Hampshire.
Re: Parts from other bikes which fit the ZXR
Never mind, just bought this:
http://www.visordown.com/motorcycle-new ... /6083.html
http://www.visordown.com/motorcycle-new ... /6083.html
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Parts from other bikes which fit the ZXR
great little idea but it aint gonna get you home unless you happen to have one in your pocket at the time.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- Posts: 60
- Joined: Thu Mar 01, 2012 9:49 pm
- My Bike: ZXR 400 L4
- Location: Basingstoke, Hampshire.
Re: Parts from other bikes which fit the ZXR
It lives under my seat, in my tool kit
-
- zxr400 oc member
- Posts: 29
- Joined: Sat Dec 04, 2010 7:16 pm
- My Bike: ZXR400 H1 '90
Re: Parts from other bikes which fit the ZXR
Hi,CaNsA wrote:zx6r f1 rear shock.
shave a couple of mm from either side the top fixing hole carrier bit.
That's apply to an H1 model too ? My rear shock is dying ... may I replace it by an L or ZX6R F1 ones ?
-
- Posts: 1
- Joined: Sat Mar 31, 2012 10:51 pm
Re: Parts from other bikes which fit the ZXR
Can anyone tell me if there are any bigger engines that would fit in without much stress?
-
- zxr400 oc member
- Posts: 29
- Joined: Sat Dec 04, 2010 7:16 pm
- My Bike: ZXR400 H1 '90
Re: Parts from other bikes which fit the ZXR
Kawasaki ZXR 750 H throttle cables part numbers 54012-1314 & 54012-1315 doesn't fit on H model. I bought them on Cradley Kawasaki to fit on my bike after reading that on this thread, but they are different and shorter, please, update the thread !
-
- Posts: 77
- Joined: Thu Jan 03, 2013 1:26 am
- My Bike: ZXR 400 L9
Re: Parts from other bikes which fit the ZXR
Anyone know if ZX6 discs will fit?
Looking at a set of brembo discs.
Looking at a set of brembo discs.
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Parts from other bikes which fit the ZXR
they fit H models, but not L models, H are 300mm disks, L are 310mm disks.Columbo wrote:Anyone know if ZX6 discs will fit?
Looking at a set of brembo discs.
any 310mm 5-bolt disk should fit....should...
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 77
- Joined: Thu Jan 03, 2013 1:26 am
- My Bike: ZXR 400 L9
Re: Parts from other bikes which fit the ZXR
So the L9 I bought has aftermarket indicators.
The PO hadn't fitted Indy Spacers to fill the huge hole in the fairing.
Can't find any ZXR 400 specific ones.
Will they fit from a ZX6?
The PO hadn't fitted Indy Spacers to fill the huge hole in the fairing.
Can't find any ZXR 400 specific ones.
Will they fit from a ZX6?
-
- zxr400 oc member
- Posts: 29
- Joined: Sat Dec 04, 2010 7:16 pm
- My Bike: ZXR400 H1 '90
Re: Parts from other bikes which fit the ZXR
Why don't you try these ?Columbo wrote:So the L9 I bought has aftermarket indicators.
The PO hadn't fitted Indy Spacers to fill the huge hole in the fairing.
Can't find any ZXR 400 specific ones.
Will they fit from a ZX6?
http://www.ebay.co.uk/sch/i.html?_trksi ... &_from=R40
I fited them on my H1, but I can't remember wich one exactly ...
Here is another link:
http://www2.louis.de/index.php?topic=ar ... L5&lang=en
-
- Posts: 77
- Joined: Thu Jan 03, 2013 1:26 am
- My Bike: ZXR 400 L9
Re: Parts from other bikes which fit the ZXR
Cheers for the reply.
I get the feeling that OEM Kawasaki indicators are all the same shape.
Is that the case?
I get the feeling that OEM Kawasaki indicators are all the same shape.
Is that the case?