www.zxrworld.co.uk

Hi chaps , has anyone soldered a 10k resistor on the pink wire from the igniter to remove the Rev Limiter

yes - http://www.zxrworld.co.uk/zxr400oc/view ... 164&t=9940

Thanks for the information, the existing igniter (M unit) does not have the pink wire on, but the facility is there on the unit, would you recommend connect wire with 10k resistor or leave off. I’m making a new race loom for the zxr400l
Thanks

M ignitor don't look for the restriction, you can just remove the pink wire entirly