Hello,
I am currently in the process of converting a road going zxr400 to a track bike for next year, I was wondering if anyone could point me in the direction of a quick action throttle (I assume this to be 1/4 turn?) and if there are any ones that fit from other bikes straight onto the zxr400.
I know most mx bikes use a 1/4 turn and I don't see why these wouldn't be useable (22mm handle bar etc) however It does depend on the length of cable needing to be pulled to open the throttle bodies fully... I could measure the cable length from carbs closed to fully open and compare with other bikes but this would be alot easier said than done.
Any help would be appreciated.
Cheers,
Ross
P.s I hope this to be posted in the correct forum location.
Quick Action Throttle
Moderator: Moderators
-
- Posts: 27
- Joined: Wed May 23, 2007 12:05 pm
Quick Action Throttle
what would life be without bikes!
ZXR400 l4
GSXR Shock
CBR954 Calipers
ZX7R Master Cylinder
Full Micron Sys
Custom Quickshifter
Braided Lines
Skimmed Head
Camera Mount - Yeeha!
ZXR400 l4
GSXR Shock
CBR954 Calipers
ZX7R Master Cylinder
Full Micron Sys
Custom Quickshifter
Braided Lines
Skimmed Head
Camera Mount - Yeeha!
-
- Posts: 58
- Joined: Mon Nov 14, 2011 10:12 pm
- My Bike: 2 x ZXR400 Race Bikes
Re: Quick Action Throttle
My QA throttle uses the standard cables it has different slots on the tube to increase or decrease turn